The CIA Special Agent 767 Screen Locker is a Trojan that displays a screen containing a CIA badge that states that the files on the computer have been encrypted. It then prompts you to send an "early bird" discount of $100 to the listed bitcoin address to get the decryption key. It goes on to further state that the amount will increase after 5 days. This message is fake, though, as the files are not encrypted and this is simply a lock screen trying to trick you into paying a ransom.
Thankfully, the unlock code for this scam could be retrieved from the executable and can be entered into the field to terminate the screen locker. Due to the words used in the code, I do not want to post it on the site. The unlock code for this screen locker is the same as the one in this tweet. This screenlocker can also easily be removed simply by reboot into safe mode and performing a security scan from there.
The text of the screenlocker is:
IMPORTANT! PLEASE READ!
Unfortunately the files on this computer (documents, photos, videos) have
been encrypter using an extremely secure and unbreakable algorithm. This
means that the files are now useless unless they are decrypted using a key.
The good news is that your files are not lost forever! This tool is able
to rescue the files on your computer for you!
BY PURCHASING A LICENSE FROM US, WE ARE ABLE TO RESCUE YOUR FILES 100% GUARANTEED
FOR EVERY LOW EARLY BIRD PRICE OF ONLY $100 USD!* In 5 days however, the price of this service
will increase to $250 USD, and after $500 USD.
Payment is accepted in Bitcoin only. You can purchase Bitcoin very easily in your area by bank transfer,
Western Union, or even cash.
Visit www.localbitcoins.com to find a seller in your area. You can also goolge Bitcoin Exchanges to find
other methods for buying Bitcoin
Please check the current price of Bitcoin and ensure you are sending the correct amount before making your payment! Visit
www.bitcoinaverage.com for the current Bitcoin Price.
After making your payment, please wait up to 24 hours for us to make your key available. Usually done in much less time however.
IMPORTANT: Once the key is available and you click \"Decrypt Files\", please wait and let the decryption process complete before closing
this tool. This Process can take from 15 minutes to 2+ hours depending on how many files need to be decrypted. You will get a
notification thatthe decryption process is complete, at which time you can click \"Exit\". Removing this tool from your computer without first
decrypting your files will cause your files to be lost forever.
Bitcoin Address: 1GmGBH9ra2dqA8CgRg8a8Rngx4qHb2hLDW
*Please note that early bird qualification is determined from the date that this tool was first run as recorded on our servers.
Once the correct pass code is entered, the alert that is shown will contain this text:
JUST DELETE IT
TO REMOVE IT
HAHA YOU HAVE BEEN
How did the CIA Special Agent 767 Screen Locker get on my computer?
It is not currently known how this Trojan is being distributed. It could be distributed using fake software cracks or through free programs you download off of the Internet. As more information becomes available, we will update it here.
As the current unlock code is known and we can use Safe mode with Networking clean the computer, removing this infection is fairly easy. If the code does not work or you are unable to remove it on your own, you can use the removal guide below to remove the CIA Special Agent 767 Screen Locker for free.
Self Help Guide
How to remove CIA Special Agent 767 Screen Locker:
- Step 1: Print out instructions before we begin.
- Step 2: Reboot into Safe Mode with Networking
- Step 3: Use Rkill to terminate suspicious programs.
- Step 4: Use Malwarebytes AntiMalware to clean infections.
- Step 5: Use AdwCleaner to remove adware from the computer.
- Step 6: Use HitmanPro to scan your computer for badware
- Step 7: Run Secunia PSI to find outdated and vulnerable programs.
This removal guide may appear overwhelming due to the amount of the steps and numerous programs that will be used. It was only written this way to provide clear, detailed, and easy to understand instructions that anyone can use to remove this infection for free. Before using this guide, we suggest that you read it once and download all necessary tools to your desktop. After doing so, please print this page as you may need to close your browser window or reboot your computer.
Reboot your computer into Safe Mode with Networking using the instructions for your version of Windows found in the following tutorial:
When following the steps in the above tutorial, select Safe Mode with Networking rather than just Safe Mode. When the computer reboots into Safe Mode with Networking make sure you login with the username you normally use. When you are at your Windows desktop, please continue with the rest of the steps.
To terminate any programs that may interfere with the removal process we must first download the Rkill program. Rkill will search your computer for active malware infections and attempt to terminate them so that they wont interfere with the removal process. To do this, please download RKill to your desktop from the following link.
When at the download page, click on the Download Now button labeled iExplore.exe. When you are prompted where to save it, please save it on your desktop.
Once it is downloaded, double-click on the iExplore.exe icon in order to automatically attempt to stop any processes associated with CIA Special Agent 767 Screen Locker and other malware. Please be patient while the program looks for various malware programs and ends them. When it has finished, the black window will automatically close and a log file will open. Please review the log file and then close so you can continue with the next step. If you have problems running RKill, you can download the other renamed versions of RKill from the rkill download page. All of the files are renamed copies of RKill, which you can try instead. Please note that the download page will open in a new browser window or tab.
Do not reboot your computer after running RKill as the malware programs will start again.
At this point you should download Malwarebytes Anti-Malware, or MBAM, to scan your computer for any any infections or adware that may be present. Please download Malwarebytes from the following location and save it to your desktop:
Once downloaded, close all programs and Windows on your computer, including this one.
Double-click on the icon on your desktop named mb3-setup-1878.1878-22.214.171.1249.exe. This will start the installation of MBAM onto your computer.
When the installation begins, keep following the prompts in order to continue with the installation process. Do not make any changes to default settings and when the program has finished installing, make sure you leave Launch Malwarebytes Anti-Malware checked. Then click on the Finish button. If MalwareBytes prompts you to reboot, please do not do so.
MBAM will now start and you will be at the main screen as shown below.
We now need to enable rootkit scanning to detect the largest amount of malware that is possible with MalwareBytes. To do this, click on the Settings section at the top of the MalwareBytes application and you wil be brought to the general settings section.
Now click on the Detection and Protection settings category on the left sidebar. You will now be shown the settings MalwareBytes will use when scanning your computer.
At this screen, please put a checkmark in the option labaled Scan for rootkits. If you do not see this option, please make sure you are using the latest version of MalwareBytes.
Now that you have enabled rootkit scanning, click on the Scan button to go to the scan screen.
Make sure Threat Scan is selected and then click on the Start Scan button. If there is an update available for Malwarebytes it will automatically download and install it before performing the scan.
MBAM will now start scanning your computer for malware. This process can take quite a while, so we suggest you do something else and periodically check on the status of the scan to see when it is finished.
When MBAM is finished scanning it will display a screen that displays any malware that it has detected. Please note that the infections found may be different than what is shown in the image below due to the guide being updated for newer versions of MBAM.
You should now click on the Remove Selected button to remove all the seleted malware. MBAM will now delete all of the files and registry keys and add them to the programs quarantine. When removing the files, MBAM may require a reboot in order to remove some of them. If it displays a message stating that it needs to reboot, please allow it to do so. Once your computer has rebooted, and you are logged in, please continue with the rest of the steps.
You can now exit the MBAM program.
Now please download AdwCleaner and save it to your desktop. AdwCleaner will scan your computer for adware programs that may have been installed on your computer without your knowledge. You can download AdwCleaner from the following URL:
When AdwCleaner has finished downloading, please double-click on the AdwCleaner.exe icon that now appears on your desktop. Once you double-click on the icon the AdwCleaner program will open and you will be presented with the program's license agreement. After you read it, click on the I agree button if you wish to continue. Otherwise, click on the I disagree button to close the program. If Windows prompts you as to whether or not you wish to run AdwCleaner, please allow it to run.
If you selected to continue, you will be presented with the start screen as shown below.
Now click on the Scan button in AdwCleaner. The program will now start to search for known adware programs that may be installed on your computer. When it has finished it will display all of the items it has found in Results section of the screen above. Please look through the results and try to determine if the programs that are listed contain ones that you do not want installed. If you find programs that you need to keep, then uncheck the entries associated with them.
For many people, the contents of the Results section may appear confusing. Unless you see a program name that you know should not be removed,please continue with the next step.
To remove the adware programs that were detected in the previous step, please click on the Clean button on the AdwCleaner screen. AdwCleaner will now prompt you to save any open files or data as the program will need to close any open programs before it starts to clean.
Please save your work and then click on the OK button. AdwCleaner will now delete all detected adware from your computer. When it is done it will display an alert that explains what PUPs (Potentially Unwanted Programs) and Adware are. Please read through this information and then press the OK button. You will now be presented with an alert that states AdwCleaner needs to reboot your computer.
Please click on the OK button to let AdwCleaner reboot your computer.
When your computer reboots and you are logged in, AdwCleaner will automatically open a log file that contains the files, registry keys, and programs that were removed from your computer.
Please review this log file and then close the Notepad Window.
If your computer is still in Safe Mode with Networking, you can reboot your computer back to normal mode. Once your computer is rebooted and you are back at the desktop, you can proceed with the rest of the instructions.
Now you should download HitmanPro from the following location and save it to your desktop:
When you visit the above page, please download the version that corresponds to the bit-type of the Windows version you are using.
Once downloaded, double-click on the file named HitmanPro.exe (for 32-bit versions of Windows) or HitmanPro_x64.exe (for 64-bit versions of Windows). When the program starts you will be presented with the start screen as shown below.
Now click on the Next button to continue with the scan process.
You will now be at the HitmanPro setup screen. If you would like to install the 30 day trial for HitmanPro, select the Yes, create a copy of HitmanPro so I can regularly scan this computer (recommended) option. Otherwise, if you just want to scan the computer this one time, please select the No, I only want to perform a one-time scan to check this computer option.
Once you have selected one of the options, please click on the Next button.
HitmanPro will now begin to scan your computer for infections. When it has finished it will display a list of all the malware that the program found as shown in the image below. Please note that the infections found may be different than what is shown in the image.
You should now click on the Next button to have HitmanPro remove the detected infections. When it is done you will be shown a Removal Results screen that shows the status of the various infections that were removed. At this screen you should click on the Next button and then if prompted you should click on the Reboot button. If HitmanPro does not prompt you to reboot, please just click on the Close button.
Once your computer has has restarted or you pressed the Close button, you should now be at your Windows desktop.
As many malware and unwanted programs are installed through vulnerabilities found in out-dated and insecure programs, it is strongly suggested that you use Secunia PSI to scan for vulnerable programs on your computer. A tutorial on how to use Secunia PSI to scan for vulnerable programs can be found here:
Your computer should now be free of the CIA Special Agent 767 Screen Locker program. If your current security solution allowed this program on your computer, you may want to consider purchasing the full-featured version of Malwarebytes Anti-Malware to protect against these types of threats in the future.
If you are still having problems with your computer after completing these instructions, then please follow the steps outlined in the topic link ed below:
Purchase the full-featured version of Malwarebytes Anti-Malware, which includes real-time protection, scheduled scanning, and website filtering, to protect yourself against these types of threats in the future!