I am trying to setup raid on my Dell R710. I have a Dell 6/i integrated raid controller. When I press ctrl-r, and go to create a config, the only thing I can do is clear the config. The hard drives do not show up. I tried re-inserting the raid controller, and tried different slots for the two wd 1 tb hard drives, and I still don't get anything. I've updated the firmware. It's running 6.3.3.0002, which I believe to be the latest. Hardware diagnostics showed that the perc6 0-0 ctlr passed. I am not sure what else to try... is there anything else, or does it need replacing?