Jump to content
Posted 17 September 2017 - 11:55 AM
Posted 17 September 2017 - 10:37 PM
Posted 18 September 2017 - 06:07 PM
From what I see, Error 909 issues are driver-related.
Can you boot into safe mode?
Posted 19 September 2017 - 01:28 AM
Posted 19 September 2017 - 03:54 AM
Just check to see if the system boots to safe mode.
If it does and there is no evidence of the noted problem...it could be a driver issue.
If you can boot into safe mode, then we can get some data on this system that may provide clues to what the problems are.
Posted 19 September 2017 - 09:39 AM
Posted 19 September 2017 - 12:39 PM
what fan is it? CPU? you may need to redo the thermal paste on the cpu also!
Posted 19 September 2017 - 12:42 PM
Posted 19 September 2017 - 05:49 PM
did you put a small pea size amount or did you do a nice even layer. across the top of the chip.
all you need is the small pea size drop on the center of the chip, if you used more then you can actually cause a thermal issue.
Posted 20 September 2017 - 02:08 AM
Posted 21 September 2017 - 03:27 PM
i would just clean it off with alcohol and a q tip and re-apply.
Posted 22 September 2017 - 09:18 AM
Please download MiniToolBox , save it to your desktop and run it.
Checkmark the following checkboxes:
List last 10 Event Viewer log
List Installed Programs
List Users, Partitions and Memory size.
Click Go and paste the content into your next post.
Also...please Publish a Snapshot using Speccy, taking care to post the link of the snapshot in your next post.
Go to Piriform's website, and download the free version on the left. Click Download from Piriform.com (the FileHippo link requires an extra click). Or if you want to use a portable version of Speccy (which doesn't require installation), click the builds page link and download the portable version. You will now be asked where you want to save the file. The best place to put it is the Desktop, as it will be easy to find later.
After the file finishes downloading, you are ready to run Speccy. If you downloaded the installer, simply double-click on it and follow the prompts until installation is complete. If you downloaded the portable version, you will need to unzip it before use. Right-click the ZIP file and click Extract all. Click Next. Open up the extracted folder and double-click on Speccy.
Once inside Speccy, it will look similar to this (with your computer's specifications, of course):
Now, at the top, click File > Publish Snapshot.
Click Yes > then Copy to Clipboard
Now, once you are back in the forum topic you are posting in, click the ADD REPLY or REPLY TO THIS TOPIC button. Right-click in the empty space of the Reply box and click Paste. Then, click Add Reply below the Reply box.
0 members, 0 guests, 0 anonymous users