First of all, that error code (and the extended version below) might not be properly written. I wrote them down by hand off the BSOD itself, and there were a lot of zeroes involved. It did not appear to successfully create an error report, as I left it overnight to finish that step and it was still up this morning (at which point I manually powered it down and restarted it). However, I've also never tried to look at such an error report, so I don't know for sure.
The full error code:
BUGCODE_USB_DRIVER 0x00000fe (0x0000000000000005, 0xfffffa8008ada1a0, 0x0000000080868c26, 0xfffffa800988a868)
I'm looking for general help here, mainly because when simply googling the error, the 'fixing instructions' on Solvusoft say the first step is to use a registry cleaner, while virtually everywhere else I've looked says to never touch that.
As I already mentioned, I've never attempted to look at a BSOD report (or much of anything not surface-level), so if you need virtually anything along those lines, I'll need a pointer to a how-to on getting that to you.
Finally, potentially related (in terms of more info available), I recently (7-26-2017) ran an energy report as my laptop's battery had a 'you might want to replace me' warning, and aside from only retaining 37% of its initial capacity, it came up with these potentially related errors (copy/pasted from the report):
Edited by hamluis, 02 August 2017 - 03:03 PM.
Moved from Win 7 to Crashes/BSODs - Hamluis.