Please run this report collecting tool so that we can provide a complete analysis: (from the pinned topic at the top of the forum) http://www.bleepingcomputer.com/forums/t/576314/blue-screen-of-death-bsod-posting-instructions-windows-10-81-8-7-vista/
FYI - I don't often use the Perfmon report, so if it doesn't work please just let me know.
NOTE: On problem systems it can take up to 20 minutes for the log files to complete. Please be patient and let it run.
If you still have problems with it running, there's an alternate tool here (direct download link): https://github.com/blueelvis/BSOD-Inspector/releases/download/1.0.5/BSODInspector-1.0.5.exe
Please zip up the (.ZIP) files - do not use .RAR, .7z or other compression utilities.
.ZIP is the type file that can be uploaded to the forums.
Also, please try this after the next time it turns black on you
Recover from the black screen as you usually do, then immediately run this report.
You can start the temperature thing immediately if you'd like:
Please do the following:
- open Event Viewer (run eventvwr.msc from the "Run" dialog)
- expand the Custom Views category (left click on the > next to the words "Custom Views")
- right click on the "Administrative Events" heading
- select "Save all Events in Custom View as..."
- save the file as Admin.evtx
- zip up the file (right click on it, select "Send to", select "Compressed (zipped) folder")
- upload it with your next post (if it's too big, then upload it to a free file-hosting service and post a link here).
FYI - If we're looking for Event ID 41 errors (unexplained shutdowns), there's more info on that here: http://support.microsoft.com/kb/2028504
While waiting for a reply, please monitor your temps with this free utility:
SpeedFan v. 4.5.1 and later (free from here: http://www.almico.com/sfdownload.php ) can log temperatures in a CSV file:
You may not need to log temps. If uncertain, please ask.
To make it work (log the temps to a file) you have to do BOTH of the below:NOTE:You may want to turn logging off when we're done - as I don't know it's impact on performance or on the system.
1. Enable logging in general: Configure...Log...check "Enabled" then click on OK to save.
2. Enable logging for specific checks: Configure...Temperatures..left click on each sensor, then click on "Logged" at the bottom of the Window (for our purposes we want them all) then once you've selected "Logged" for all sensors, then click on OK to save.
The log will be located at C:\Program Files (x86)\SpeedFan
Naming: log files are named SFLogYYYYMMDD.csv, where YYYY is the year (four digits), MM is the month (2 digits, zero padded) and DD is the day (2 digits, zero padded). If a file already exists by that name, the file that already exists is renamed according to the following naming scheme: SFLogYYYYMMDD-CCCC.csv, where CCCC is a increasing number. The new file is then created with the standard file name scheme.
Notes: whenever you change the options related with logging, SpeedFan starts a new log file.
Edited by usasma, 13 April 2017 - 07:57 AM.
My browser caused a flood of traffic, sio my IP address was banned. Hope to fix it soon. Will get back to posting as soon as Im able. - John
(my website: http://www.carrona.org/
)**If you need a more detailed explanation, please ask for it. I have the Knack
. ** If I haven't replied in 48 hours, please send me a message. My eye problems have recently increased and I'm having difficult reading posts. (23 Nov 2017)FYI - I am completely blind in the right eye and ~30% blind in the left eye.
<p>If the eye problems get worse suddenly, I may not be able to respond.If that's the case and help is needed, please PM a staff member for assistance.