Jump to content


 


Register a free account to unlock additional features at BleepingComputer.com
Welcome to BleepingComputer, a free community where people like yourself come together to discuss and learn how to use their computers. Using the site is easy and fun. As a guest, you can browse and view the various discussions in the forums, but can not create a new topic or reply to an existing one unless you are logged in. Other benefits of registering an account are subscribing to topics and forums, creating a blog, and having no ads shown anywhere on the site.


Click here to Register a free account now! or read our Welcome Guide to learn how to use this site.

Photo

System freezes, lags, fps drops


  • Please log in to reply
4 replies to this topic

#1 TheWeirdGuy

TheWeirdGuy

  • Members
  • 10 posts
  • OFFLINE
  •  

Posted 17 January 2017 - 02:06 PM

Hi.
Im newbie in pc  world so dont mind if im not saying as should be and sorry about my English language.
So i bought completly new PC. At start i was using 1920x1080 monitor, but in games like GTA V, WITCHER 3 GPU didnt run full load 99,100% as it should be. So i decide to overclock my cpu.
My biggest mistake - i didnt read anything about overclock i just get into BIOS and raised clocks to 4.8 Ghz and voltage to 1.6 V (pc just crashed and it changed to factory settings)
Then i launched BIOS and set cpu @ 4.2 Ghz and voltage 1.380 V (This was lowest voltage could i set otherwise pc crashed used aida 64 for test) (in total pc crashed, restarted about 10-15 times)
After overclock - games stuttering, freezing, fps drops (sometimes screen just stuck for mili seconds but GPU usage dont drops, when freeze is bigger also usage drops, few times noticed that on desktop mouse cursor also stuck's)
Temp's are fine GPU dont hit more than 76C, cpu OC 65C, cpu default 50C, motherboard 35C, SSD's 25-32C. Also reset BIOS to default, cleared CMOS, installed latest version of BIOS. Installed newest NVIDIA driver (used DDU to uninstall old driver's)
Reinstalled win 10, contaced with MSI, NVIDIA, ASUS. Tried to find info forums/videos even took PC back to store for diagnostic's (dont know what they did with PC, but all i know is they sent videocard back to manufacturer and 
they reported that videocard are ok) So i have no clue.. Im thinking that some part is damaged. Any help will be very appreciate. THANKS <3
 
System:
Monitor: Acer Predator 2560x1440p Gsync to 165hz, before Benq 1920x1080p to 60hz.
Case: Corsair 780T
Fans: Corsair 12mm x 4 quite edition, H105 Thick 240MM
MOBO: X99A GAMING CARBON PRO
GPU: ASUS GTX 1080 Advanced version
RAM: Corsair 2 x 8gb (16gb) @ 3466 mhz
CPU: 6850k Broadwell-e
SSD: SAMSUNG 512 GB (win10)
SSD: SAMSUNG 1 TB (games,other stuff)
Power Supply: HX1000i
APC SMART UPS 1000V, 230V

Attached Files



BC AdBot (Login to Remove)

 


#2 usasma

usasma

    Still visually handicapped (avatar is memory developed by my Dad


  • BSOD Kernel Dump Expert
  • 25,090 posts
  • OFFLINE
  •  
  • Gender:Male
  • Location:Southeastern CT, USA
  • Local time:03:45 AM

Posted 20 January 2017 - 10:28 AM

Please ensure that the system is not overclocked, then wait for it to cause problems.

Then recover from the problem(s) and immediately generate these 2 sets of reports:

Report Set #1)  Please run this report collecting tool (even though you may not be experiencing BSOD's) so that we can provide a complete analysis: (from the pinned topic at the top of the forum)   http://www.bleepingcomputer.com/forums/t/576314/blue-screen-of-death-bsod-posting-instructions-windows-10-81-8-7-vista/
FYI - I don't often use the Perfmon report, so if it doesn't work please just let me know.

If you have problems with it running it, there's an alternate tool here (direct download link):  https://github.com/blueelvis/BSOD-Inspector/releases/download/1.0.5/BSODInspector-1.0.5.exe

NOTE:
Please zip up the (.ZIP) files - do not use .RAR or other compression utilities. 
.ZIP is the type file that can be uploaded to the forums.

Report Set #2)  Please do the following:
- open Event Viewer (run eventvwr.msc from the "Run" dialog)
- expand the Custom Views category (left click on the > next to the words "Custom Views")
- right click on the "Administrative Events" heading
- select "Save all Events in Custom View as..."
- save the file as Admin.evtx
- zip up the file (right click on it, select "Send to", select "Compressed (zipped) folder")
- upload it with your next post (if it's too big, then upload it to a free file-hosting service and post a link here).

FYI - If we're looking for Event ID 41 errors (unexplained shutdowns), there's more info on that here:  http://support.microsoft.com/kb/2028504

While waiting for a reply, please monitor your temps with this free utility: 

SpeedFan v. 4.5.1 and later (free from here:  http://www.almico.com/sfdownload.php ) can log temperatures in a CSV file:
You may not need to log temps - if uncertain, please ask.

To make it work (log the temps to a file) you have to do BOTH of the below:

1. Enable logging in general: Configure...Log...check "Enabled" then click on OK to save.

2. Enable logging for specific checks: Configure...Temperatures..left click on each sensor, then click on "Logged" at the bottom of the Window (for our purposes we want them all) then once you've selected "Logged" for all sensors, then click on OK to save.

The log will be located at C:\Program Files (x86)\SpeedFan

Naming: log files are named SFLogYYYYMMDD.csv, where YYYY is the year (four digits), MM is the month (2 digits, zero padded) and DD is the day (2 digits, zero padded). If a file already exists by that name, the file that already exists is renamed according to the following naming scheme: SFLogYYYYMMDD-CCCC.csv, where CCCC is a increasing number. The new file is then created with the standard file name scheme.

Notes: whenever you change the options related with logging, SpeedFan starts a new log file.

NOTE:You may want to turn logging off when we're done - as I don't know it's impact on performance or on the system.



While waiting for a reply, please run ALL of these free hardware diagnostics:  http://www.carrona.org/hwdiag.html

Please run ALL of the tests and let us know the results.


My browser caused a flood of traffic, sio my IP address was banned. Hope to fix it soon. Will get back to posting as soon as Im able.

- John  (my website: http://www.carrona.org/ )**If you need a more detailed explanation, please ask for it. I have the Knack. **  If I haven't replied in 48 hours, please send me a message. My eye problems have recently increased and I'm having difficult reading posts. (23 Nov 2017)FYI - I am completely blind in the right eye and ~30% blind in the left eye.<p>If the eye problems get worse suddenly, I may not be able to respond.If that's the case and help is needed, please PM a staff member for assistance.

#3 TheWeirdGuy

TheWeirdGuy
  • Topic Starter

  • Members
  • 10 posts
  • OFFLINE
  •  

Posted 21 January 2017 - 02:16 PM

Thank you for reply. Problem is lowered no huge fps drops anymore, but sometimes game's having graphical issues like: https://postimg.org/image/dxicfo669/

MB and RAM - current ram module's are not supported for X99A GAMING CARBON PRO.. Also SSD's are not supported too for this MB but i think its not big deal. Current ram module's - CMK16GX4M2B3200C16 

FPS drop cause:

Problem started after failed overclock tried reset BIOS settings, cleared CMOS but nothing worked out after doing these steps..

For some reason MB BIOS didn't fully reset voltage's, especially for CPU.. In BIOS is three options 1.Manual 2.Auto 3. Offset
After reseting bios it sets back to 2.Auto (but when i checked CPU voltages it was on 1.34 Volts @ 3.8 Ghz)
I just set every settings what i could to OFFSET and now i'm lagg free, hope these voltage's dosen't damaged my hardware..
Also turned ram XMP on and thats it.. :) 

Requested info - https://files.fm/u/szxxtkcz#_
Also did a lot of test's, these are one of them: intet diagnostic tool, memtest, testburner no any error detected.. And ye PC was in diagnostic's also - all passed.
Thanks for helping out <3


#4 usasma

usasma

    Still visually handicapped (avatar is memory developed by my Dad


  • BSOD Kernel Dump Expert
  • 25,090 posts
  • OFFLINE
  •  
  • Gender:Male
  • Location:Southeastern CT, USA
  • Local time:03:45 AM

Posted 22 January 2017 - 09:47 AM

If the system won't run with the BIOS set on defaults - then there's either a problem with the BIOS or the motherboard.

I'd suggest posting over in the internal hardware forums for some more expert advice:    http://www.bleepingcomputer.com/forums/f/7/internal-hardware/ 


My browser caused a flood of traffic, sio my IP address was banned. Hope to fix it soon. Will get back to posting as soon as Im able.

- John  (my website: http://www.carrona.org/ )**If you need a more detailed explanation, please ask for it. I have the Knack. **  If I haven't replied in 48 hours, please send me a message. My eye problems have recently increased and I'm having difficult reading posts. (23 Nov 2017)FYI - I am completely blind in the right eye and ~30% blind in the left eye.<p>If the eye problems get worse suddenly, I may not be able to respond.If that's the case and help is needed, please PM a staff member for assistance.

#5 TheWeirdGuy

TheWeirdGuy
  • Topic Starter

  • Members
  • 10 posts
  • OFFLINE
  •  

Posted 26 February 2017 - 09:51 AM

*Frame time spikes – SOLVED
Now everything runs smooth without stutters/fps drops. This problem caused by voice chat software called “Curse”. Even if i dont run this app or just uninstall – i still had performance issues. BUT after re-install win10 and not installing this nightmare i am able run my games without any problems!






0 user(s) are reading this topic

0 members, 0 guests, 0 anonymous users