Jump to content


Register a free account to unlock additional features at BleepingComputer.com
Welcome to BleepingComputer, a free community where people like yourself come together to discuss and learn how to use their computers. Using the site is easy and fun. As a guest, you can browse and view the various discussions in the forums, but can not create a new topic or reply to an existing one unless you are logged in. Other benefits of registering an account are subscribing to topics and forums, creating a blog, and having no ads shown anywhere on the site.

Click here to Register a free account now! or read our Welcome Guide to learn how to use this site.


Hardware Situation, Split From http://www.bleepingcomputer.com/forums/t/522828/gpu-wont-work-in-my-s

  • Please log in to reply
1 reply to this topic

#1 lucasrahn09


  • Members
  • 2 posts
  • Local time:05:45 PM

Posted 10 August 2016 - 12:25 PM

I know it may be weird that im reviving this topic but i have had almost the exact same problem with my computer!!
I am having troubles getting my monitor to receive an HDMI signal from my PC's graphics card. My PC, in general has been perfect since i first built it. One night i was on it and i was about to go to bed so i turned it off and realized i needed to plug my phone in so i turned it back on and plugged it in(not a regular occurrence i leave it on overnight). I woke up and i turned on the monitor and it said hdmi no signal, I did a bunch of simple checks and nothing worked. I have nailed it down to a problem with the PC by trying different monitors, trying monitor on another source, using different cables etc..
I pulled my graphics card plugged back in, no go
Pulled Ram, back in, no go
Reset the bios by using VGA in my mother board, no go
I decided to take my PC to a friends. I used my graphics card in his PC, it worked. This led me to believe it was a mother board problem.
I plugged his graphics card into my computer, it worked. Led me to believe it could be a drivers problem.
Uninstalled AMD Catalyst Control center reinstalled, No go. I dont know where else to go
Intel® Core™ i5-3470 CPU @ 3.20 GHz
MSI AMD Radeon HD 7770 1GB
8GB Ram DDR3
MSI B75MA - E33 MINI Motherboard
Friends Graphics card - Radeon r290x
thanks so much in advance!
PS: I couldnt find anything else similar to my problem on the net!

Edited by lucasrahn09, 10 August 2016 - 12:26 PM.

BC AdBot (Login to Remove)


#2 hamluis



  • Moderator
  • 56,299 posts
  • Gender:Male
  • Location:Killeen, TX
  • Local time:04:45 PM

Posted 10 August 2016 - 04:55 PM

Please download MiniToolBox  , save it to your desktop and run it.
Checkmark the following checkboxes:
  List last 10 Event Viewer log
  List Installed Programs
  List Users, Partitions and Memory size.
Click Go and paste the content into your next post.
Also...please Publish a Snapshot using Speccy taking care to post the link of the snapshot in your next post.

   Go to Piriform's website, and download the free version on the left.  Click Download from Piriform.com (the FileHippo link requires an extra click). Or if you want to use a portable version of Speccy (which doesn't require installation), click the builds page link and download the portable version. You will now be asked where you want to save the file. The best place to put it is the Desktop, as it will be easy to find later.

    After the file finishes downloading, you are ready to run Speccy. If you downloaded the installer, simply double-click on it and follow the prompts until installation is complete. If you downloaded the portable version, you will need to unzip it before use. Right-click the ZIP file and click Extract all. Click Next. Open up the extracted folder and double-click on Speccy.
     Once inside Speccy, it will look similar to this (with your computer's specifications, of course):


     Now, at the top, click File > Publish Snapshot. You will see the following prompt:


     Click Yes > then Copy to Clipboard


Now, once you are back in the forum topic you are posting in, click the p22004370.gif button. Right-click in the empty space of the Reply box and click Paste. Then, click Add Reply below the Reply box.

Congrats! You have just posted your specs.


0 user(s) are reading this topic

0 members, 0 guests, 0 anonymous users