Hello. I'm new to the forum so i'll start by saying Hi to everyone. Right now to my problem. I have got a dead computer from a friend to see if i can fix it. I have opened it up and its a mess. The cpu fan case was on one side i have taken that off and the cpu was not conected. I have pushed the pins in and put the heatshrink and fan back on and checked all the cables are connected. The pc powers up but the monitor cames up with no signal. I re took the cpu off and noticed some off the pins where bent.
Now i have straighteed them up and re connected everything but still have the same signal. Does anyone have any ideas what might be wrong? Is the cpu buggered am i missing something realy simple.
Any help would be great.
You can lead a horse to water, But you can't get it to surf.
Edited by morkfromork, 23 July 2006 - 03:32 PM.