Jump to content


 


Register a free account to unlock additional features at BleepingComputer.com
Welcome to BleepingComputer, a free community where people like yourself come together to discuss and learn how to use their computers. Using the site is easy and fun. As a guest, you can browse and view the various discussions in the forums, but can not create a new topic or reply to an existing one unless you are logged in. Other benefits of registering an account are subscribing to topics and forums, creating a blog, and having no ads shown anywhere on the site.


Click here to Register a free account now! or read our Welcome Guide to learn how to use this site.

Photo

help PC fans runing 100%


  • Please log in to reply
3 replies to this topic

#1 jesusw00t

jesusw00t

  • Members
  • 2 posts
  • OFFLINE
  •  
  • Local time:11:32 PM

Posted 11 July 2015 - 09:54 AM

i have a

Gateway E-4610D Intel DQ965MT OEM motherboard

i added a new hard drive today but could not change the boot order in BIOS since it had a supervisor password. so i reset the jumper pins and made the BIOS to factory setting. now i have the fans on my computer running 100% which are 4-pin fans(i was able to control them before using BIOS and Speedfan).

i cant control the fans now i went into speedfan and it only detected my GPU fan nothing else. same with HWmonitor.

also i noticed the on device manager in windows XP it says that intel managemnt engine interface is not working (code 10) location PCI bus 0,device 3,fuction 0

i tried to google my problem for three hours now with no help and gateway discontinued service for this old model so i cant even check if there is a bios update.

anyone have this problem before pm me if you need more information

 



BC AdBot (Login to Remove)

 


#2 brainout

brainout

  • Members
  • 1,190 posts
  • OFFLINE
  •  
  • Gender:Female
  • Location:Houston
  • Local time:09:32 PM

Posted 11 July 2015 - 10:39 PM

Well, I don't know if you reset jumper pins.  That's beyond my knowledge.  But what if the problem is simpler?  Here's what fixed my machine so the fans stopped running like that, even when the machine was not on, but just plugged in:

 

1.  Unplug machine.

2.  PUSH AND HOLD the power button in for 30 seconds. Then let go.

3.  Plug in machine, see if the fans are still running high.  They should stop or be 'normal'.

4.  Turn on machine, see if the fans still behave normally.

 

You can google on the '30 seconds' and 'power button' to see variants of this same issue, maybe someone also covered jumper pins?


Edited by brainout, 11 July 2015 - 10:39 PM.

(Away, Notifications Off) AUDIT PREMISES, my guidon.  -- brainout or brainouty on vimeo or Youtube, domain brainout.net


#3 jesusw00t

jesusw00t
  • Topic Starter

  • Members
  • 2 posts
  • OFFLINE
  •  
  • Local time:11:32 PM

Posted 12 July 2015 - 07:41 AM

Well, I don't know if you reset jumper pins.  That's beyond my knowledge.  But what if the problem is simpler?  Here's what fixed my machine so the fans stopped running like that, even when the machine was not on, but just plugged in:

 

1.  Unplug machine.

2.  PUSH AND HOLD the power button in for 30 seconds. Then let go.

3.  Plug in machine, see if the fans are still running high.  They should stop or be 'normal'.

4.  Turn on machine, see if the fans still behave normally.

 

You can google on the '30 seconds' and 'power button' to see variants of this same issue, maybe someone also covered jumper pins?

 

ok im going to tryed this and it did not work,

 

sorry for the wall of text im just wanted to context of what i have done to the computer before this probelm started.



#4 hamluis

hamluis

    Moderator


  • Moderator
  • 55,552 posts
  • OFFLINE
  •  
  • Gender:Male
  • Location:Killeen, TX
  • Local time:10:32 PM

Posted 12 July 2015 - 08:11 AM

Please download MiniToolBox  , save it to your desktop and run it.
 
Checkmark the following checkboxes:
  List last 10 Event Viewer log
  List Installed Programs
  List Users, Partitions and Memory size.
 
Click Go and paste the content into your next post.
 
Also...please Publish a Snapshot using Speccy - http://www.bleepingcomputer.com/forums/topic323892.html/page__p__1797792#entry1797792 , taking care to post the link of the snapshot in your next post.
 
Louis






0 user(s) are reading this topic

0 members, 0 guests, 0 anonymous users