Jump to content


 


Register a free account to unlock additional features at BleepingComputer.com
Welcome to BleepingComputer, a free community where people like yourself come together to discuss and learn how to use their computers. Using the site is easy and fun. As a guest, you can browse and view the various discussions in the forums, but can not create a new topic or reply to an existing one unless you are logged in. Other benefits of registering an account are subscribing to topics and forums, creating a blog, and having no ads shown anywhere on the site.


Click here to Register a free account now! or read our Welcome Guide to learn how to use this site.

Photo

View Hikvision subnet


  • Please log in to reply
3 replies to this topic

#1 wickedfun

wickedfun

  • Members
  • 2 posts
  • OFFLINE
  •  
  • Local time:04:54 PM

Posted 26 March 2015 - 12:07 AM

Hi there,

 

I need some network subnet help please.

My network modem/router is a Netgear DGN2200v3, I have my home network setup using 192.168.0.1 I also have a TP-Link TL-SG2216 plugged into the netgear. The netgear does all the DHCP. Everything works and I can navigate my way around this network fine.

I added a Hikvision (DS-7608NI-E2/8P) network video recorder to the network on a static IP of 192.168.0.100 it has 8 cameras connected to its own built in PoE hub.

I can access this recorder and view the security camera’s no problem. I has a built in web server running on 192.168.0.100

The Hikvision has assigned the cameras ip addresses on their own subnet 192.168.254.10 - 192.168.254.20

I can’t connect to the subnet, how can I access the .254 subnet from the .0 network.

 

Many thanks.

Wayne



BC AdBot (Login to Remove)

 


#2 CaveDweller2

CaveDweller2

  • Members
  • 2,629 posts
  • OFFLINE
  •  
  • Gender:Male
  • Local time:04:54 AM

Posted 26 March 2015 - 09:45 AM

Change them. http://www.hikvision.com/UploadFile/image/2014082721572421869.pdf  <<--- starts on Page 45 continues to top of 47


Hope this helps thumbup.gif

Associate in Applied Science - Network Systems Management - Trident Technical College


#3 wickedfun

wickedfun
  • Topic Starter

  • Members
  • 2 posts
  • OFFLINE
  •  
  • Local time:04:54 PM

Posted 26 March 2015 - 10:26 PM

Thanks CaveMan,

 

I had tried that, but the camera's didn't like that. I ran into all kinds of other drama's with the NVR not finding the camera's (Chinese hardware problems ?).

I have found a quick and nasty solution, I have put a patch cable from the NVR hub into the T-Plink switch. Seems to have bridged the networks ? I don't know if this will cause problems later on (bridging the two subnets) i'm not sure how mixed networks work ???

 

Thanks again.


Edited by wickedfun, 26 March 2015 - 10:27 PM.


#4 CaveDweller2

CaveDweller2

  • Members
  • 2,629 posts
  • OFFLINE
  •  
  • Gender:Male
  • Local time:04:54 AM

Posted 26 March 2015 - 10:43 PM

If it works it works.


Hope this helps thumbup.gif

Associate in Applied Science - Network Systems Management - Trident Technical College





0 user(s) are reading this topic

0 members, 0 guests, 0 anonymous users