Sorry for the re-post but i didnt get any help the last time ,this time i have a comodo firewall report blocking the iana ip.
Here is the question: I had a problem with my network adapter not getting the ipv4 ip address from my router every time i closed my computer with my network adapter disabled ,after opening my pc if i would re-enable my adapter i would find a IANA ip present in ipv4 instead of my routers address (i checked the address and it belonged to iana's official address blocks) .It didnt matter if it was the wifi adapter or lan ,the same thing was happening for both adapters.So the only way i could get my routers ipv4 address was if i had my adapter enabled before shutdown, not disabled .I didnt have this problem with any of my other laptops or phones or etc connected to my network. I Hope i explained the issue i had clearly enough.
The problem seemed to have disappeared completely after i restored my system from a backup i did a month or two ago but it came back ,i got it again after 2/3 , i have to say i have some windows services and firewall services disabled ,but i only disabled the ones that were unnecessary ,can that be the cause for it?How can i solved this?
Here is the comodo firewall report:
COMODO Firewall Logs
Date Application Action Direction Protocol Source IP Source Port Destination IP Destination Port
2014-11-20 22:09:57 Windows Operating System Blocked In ARP 192.168.1.4 192.168.1.4
2014-11-20 22:09:30 Windows Operating System Blocked In ARP 169.254.56.46 169.254.56.46
2014-11-20 22:09:23 Windows Operating System Blocked In ARP 192.168.1.1 192.168.1.1
2014-11-20 21:53:41 Windows Operating System Blocked In ARP 192.168.1.4 192.168.1.4
2014-11-20 21:53:15 Windows Operating System Blocked In ARP 169.254.56.46 169.254.56.46
2014-11-20 21:53:09 Windows Operating System Blocked In ARP 192.168.1.1 192.168.1.1
2014-11-20 21:52:51 Windows Operating System Blocked In ARP 192.168.1.1 192.168.1.1
End of The Report
Edited by watsonnn, 03 December 2014 - 05:23 AM.