Jump to content


 


Register a free account to unlock additional features at BleepingComputer.com
Welcome to BleepingComputer, a free community where people like yourself come together to discuss and learn how to use their computers. Using the site is easy and fun. As a guest, you can browse and view the various discussions in the forums, but can not create a new topic or reply to an existing one unless you are logged in. Other benefits of registering an account are subscribing to topics and forums, creating a blog, and having no ads shown anywhere on the site.


Click here to Register a free account now! or read our Welcome Guide to learn how to use this site.

Cable causes Power Supply to not function


  • Please log in to reply
1 reply to this topic

#1 Guest_Tech1292_*

Guest_Tech1292_*

  • Guests
  • OFFLINE
  •  

Posted 13 March 2013 - 07:56 AM

I have an HP a630n tower. The Power Supply within the computer will only function when the 20 pin connector is plugged in. The fan spins extremely slow like it's receiving little power. (Note: Only this cable plugged in will work.) Now, when I plug in a different cable (Example: The P7 (CPU fan) the power supply will go out. (The green light on the back will disappear.)) What could be the problem? No new hardware has been added recently.



BC AdBot (Login to Remove)

 


#2 dc3

dc3

    Bleeping Treehugger


  • Members
  • 30,372 posts
  • OFFLINE
  •  
  • Gender:Male
  • Location:Sierra Foothills of Northern Ca.

Posted 13 March 2013 - 03:39 PM

The Power Supply within the computer will only function when the 20 pin connector is plugged in

 

When you press the power button it shorts two header pins on the motherboard which starts the PSU.

 

It sounds like there might be a problem with the PSU.  If you have a multimeter with a DC scale, or have access to one you can check the rail voltages.

 


Reading PSU Rail Voltages

Caution: Please read this before continuing.


·    Since it will be necessary for your computer to be on during this procedure, you need to be aware that you will be working with live 12Volt DC potentials, which if handled improperly may lead to electrical shock.

·    There are electronics inside the case that are very susceptible to electrostatic discharges. To protect your computer, touch the metal of the case to discharge yourself of any electrostatic charges before touching any of the components inside.

·    If you are not comfortable doing this procedure, then I would suggest that you not use this tutorial. The risks involved are minimal, but are there nevertheless. Anyone who uses this tutorial will be doing so at their own risk.


There are two devices commonly used to read the rail voltages: a PSU tester, and a multimeter.

The PSU tester is the easiest to use since all that is necessary is to plug the different connectors into the tester and read the results on the LCD display. The problem with most of these is that they only perform a pass/fail test.  They will not provide you with actual voltage readings.

There are a variety of multiple meters, but this tutorial will address Analog and Digital multimeters. The advantage of these meters is that you will be able to obtain accurate real time voltage readings.

For those of you who wish to know more about multimeters there is an excellent article in Wikipedia.


Analog Multimeter

th_analogedited.jpg


An Analog multimeter is a little more complicated to use. Both Analog and Digital multimeters need to be set to the appropriate voltage, but with an Analog multimeter, you will need to choose the voltage range and must read the proper scale.

The Analog multimeter uses a needle display which moves from 0 across the scale until it reaches the voltage being tested. This multimeter has five major linear divisions with multiple scales to read a variety of ranges. An example would be three different ranges. The first is graduated in increments of 0 through 5, the second, 0 through 10, and the third, 0 through 25. Each of these ranges are subdivided into divisions that are graduated into tenths. In order to read 12 volts the 0 through 25 range would be the appropriate one.

Because DC voltage has positive and negative potentials this device is polar sensitive, this means that if you reverse the two probes when reading a positive DC voltage it will read as a negative voltage. This is actually necessary to read negative DC voltages. The two probes are differentiated by their color, Black (negative), and Red (positive). To read a positive DC voltage, the correct probes must be used with their corresponding potentials (positive to positive and negative to negative).

With the probes being used normally to read a negative DC voltage, the needle moves from the 0 to the left, "pegging" the needle. By reversing the probes you can properly read the negative voltages.

Digital Multimeter

th_digitalmeteredited.jpg


The Digital multimeter (DMM) is much simpler to use. As was mentioned previously, you will need to set the appropriate voltage. One of the advantages is that the DMM has an LCD display with a numeric readout, so there are not any multiple scales to read. Another advantage is that most DMMs are autoranging when reading voltages, which means that you will not need to set the range with these DMMs. A DMM will read both positive and negative DC voltages and display them correctly. When reading a negative voltage, a minus sign will appear on the display before the numeric value. This still is a polar sensitive device, so you will still need to use the positive and negative probes with their corresponding potentials.

There are five different DC rail voltages which are color coded. The Black wires are always negative.

Yellow +12VDC

Blue -12VDC

Red +5VDC

White -5VDC

Orange +3.3VDC


There are only three voltages that can be measured easily without disconnecting the 20/24 pin connector from the motherboard: +12V, +5V, and +3.3V.

The +12V and +5V voltages can be read from a four pin Molex power connector.

Four pin Molex power connector

th_250px-Molex_female_connector.jpg


The same voltages can be taken from a four pin SATA power connector, but in order to read the +3.3V you will need to read this from a five pin SATA power connector as seen below.

Five pin SATA power connector.

th_sata-power-cable.jpg

To read these voltages you will need to insert the Black (-) probe into any of the black  sockets, and insert the Red (+) probe in the different colored voltage sockets.   To read the voltages from a SATA power connector it is easiest to insert the probes into the bac k of the connector where the wires enter.  Unfortunately the sockets of the modular SATA power connectors are not accessible from the back, so the readings will need to be made from the socket side.  Some probes are going to be too large to fit in these sockets, so you may need to insert a piece of wire into the socket of which you want to read the voltage of and place the probe on this for your reading.  To reduce the potential of creating a short I would suggest taking the ground potential from another connector so that the two wires will remain physically separated.

Caution:  It is very important to make sure that you don't allow the two probes to touch each other when taking the voltage readings.  This will cause a short which could damage the PSU or other components.

To get accurate readings of the rail voltages it is important that there be a load on the PSU. In order to do this I would suggest downloading Prime95 for this purpose. This program was designed to be used by overclockers to put a full load on the RAM and CPU to determine the stability of their overclocking.  Because of this it will put stress on the CPU and RAM which will create higher than normal temperatures.  For this reason I would suggest not running this program any longer than is necessary.  I would also suggest that an inspection be made of the interior of the case to make sure that there isn’t an accumulation of dust which would impede adequate cooling.  Pay special attention to the heat sink and fan assembly on the CPU.  If there is a dedicated graphics card with a fan installed on it, look at this fan as well.      


Readings should not have variances larger than +/- five percent.  

Maximum.........Minimum
12.6V.................11.4V
5.25V.................4.75V
3.47V.................3.14V
 


Family and loved ones will always be a priority in my daily life.  You never know when one will leave you.

 

 

 

 





0 user(s) are reading this topic

0 members, 0 guests, 0 anonymous users