am i really infected or its just a false threat?
i did noticed that my interent connection is slow
Edited by cowboys2006, 19 February 2012 - 09:52 PM.
Jump to content
Posted 19 February 2012 - 09:51 PM
Edited by cowboys2006, 19 February 2012 - 09:52 PM.
Posted 19 February 2012 - 09:55 PM
NOTEMalwarebytes is now offering a free trial of their program, if you want to accept it you will need to enter some billing information, so that at the end of the trial you would be charged the cost of the product. Please decline this offer, if you are unable to provide billing information. If you want to try it out, then provide the billing information.
Please download Malwarebytes Anti-Malware and save it to your desktop.
Download Link 1
Download Link 2MBAM may "make changes to your registry" as part of its disinfection routine. If using other security programs that detect registry changes (ie Spybot's Teatimer), they may interfere or alert you. Temporarily disable such programs or permit them to allow the changes.
MBAM will automatically start and you will be asked to update the program before performing a scan.
- Make sure you are connected to the Internet.
- Double-click on mbam-setup.exe to install the application.
For instructions with screenshots, please refer to the How to use Malwarebytes' Anti-Malware Guide.
- When the installation begins, follow the prompts and do not make any changes to default settings.
- When installation has finished, make sure you leave both of these checked:
- Update Malwarebytes' Anti-Malware
- Launch Malwarebytes' Anti-Malware
- Then click Finish.
On the Scanner tab:
- If an update is found, the program will automatically update itself. Press the OK button to close that box and continue.
- If you encounter any problems while downloading the definition updates, manually download them from here and just double-click on mbam-rules.exe to install.
Back at the main Scanner screen:
- Make sure the "Perform Full Scan" option is selected.
- Then click on the Scan button.
- If asked to select the drives to scan, leave all the drives selected and click on the Start Scan button.
- The scan will begin and "Scan in progress" will show at the top. It may take some time to complete so please be patient.
- When the scan is finished, a message box will say "The scan completed successfully. Click 'Show Results' to display all objects found".
- Click OK to close the message box and continue with the removal process.
Note: If MBAM encounters a file that is difficult to remove, you will be asked to reboot your computer so MBAM can proceed with the disinfection process. If asked to restart the computer, please do so immediately. Failure to reboot normally (not into safe mode) will prevent MBAM from removing all the malware.
- Click on the Show Results button to see a list of any malware that was found.
- Make sure that everything is checked, and click Remove Selected.
- When removal is completed, a log report will open in Notepad.
- The log is automatically saved and can be viewed by clicking the Logs tab in MBAM.
- Copy and paste the contents of that report in your next reply. Be sure to post the complete log to include the top portion which shows MBAM's database version and your operating system.
- Exit MBAM when done.
Please download and scan with SUPERAntiSpyware Free
- Double-click SUPERAntiSypware.exe and use the default settings for installation.
- An icon will be created on your desktop. Double-click that icon to launch the program.
- If it will not start, go to Start > All Prgrams > SUPERAntiSpyware and click on Alternate Start.
- If asked to update the program definitions, click "Yes". If not, update the definitions before scanning by selecting "Check for Updates". (If you encounter any problems while downloading the updates, manually download them from here. Double-click on the hyperlink for Download Installer and save SASDEFINITIONS.EXE to your desktop. Then double-click on SASDEFINITIONS.EXE to install the definitions.)
- In the Main Menu, click the Preferences... button.
- Click the "General and Startup" tab, and under Start-up Options, make sure "Start SUPERAntiSpyware when Windows starts" box is unchecked.
- Click the "Scanning Control" tab, and under Scanner Options, make sure the following are unchecked (leave all others checked):
- Ignore files larger then 4mb
- Ignore non-executable files
Now Perform the scan with SUPERAntiSpyware as follows:
- Launch the program and back on the main screen, under "Scan for Harmful Software" click Scan your computer.
- On the left, make sure you check C:\Fixed Drive.
- On the right, under "Complete Scan", choose Perform Complete Scan and click "Next".
- After the scan is complete, a Scan Summary box will appear with potentially harmful items that were detected. Click "OK".
- Make sure everything has a checkmark next to it and click "Next".
- A notification will appear that "Quarantine and Removal is Complete". Click "OK" and then click the "Finish" button to return to the main menu.
- If asked if you want to reboot, click "Yes" and reboot normally.
- To retrieve the removal information after reboot, launch SUPERAntispyware again.[list]
- Click Preferences, then click the Statistics/Logs tab.
- Under Scanner Logs, double-click SUPERAntiSpyware Scan Log.
- If there are several logs, click the current dated log and press View log. A text file will open in your default text editor.
- Please copy and paste the Scan Log results in your next reply.
- Click Close to exit the program.
If you have a problem downloading, installing or getting SAS to run, try downloading and using the SUPERAntiSpyware Portable Scanner instead. Save the randomly named file (i.e. SAS_1710895.COM) to a usb drive or CD and transfer to the infected computer. Then double-click on it to launch and scan. The file is randomly named to help keep malware from blocking the scanner.
GMER does not work in 64bit Mode!!!!!!
Please download GMER from one of the following locations and save it to your desktop:
- Main Mirror
This version will download a randomly named file (Recommended)
- Zipped Mirror
This version will download a zip file you will need to extract first. If you use this mirror, please extract the zip file to your desktop.
-- If you encounter any problems, try running GMER in safe mode.
- Disconnect from the Internet and close all running programs.
- Temporarily disable any real-time active protection so your security programs will not conflict with gmer's driver.
- Double-click on the randomly named GMER file (i.e. n7gmo46c.exe) and allow the gmer.sys driver to load if asked.
- Note: If you downloaded the zipped version, extract the file to its own folder such as C:\gmer and then double-click on gmer.exe.
- GMER will open to the Rootkit/Malware tab and perform an automatic Full Scan when first run. (do not use the computer while the scan is in progress)
- If you receive a WARNING!!! about rootkit activity and are asked to fully scan your system...click NO.
- Now click the Scan button. If you see a rootkit warning window, click OK.
- When the scan is finished, click the Save... button to save the scan results to your Desktop. Save the file as gmer.log.
- Click the Copy button and paste the results into your next reply.
- Exit GMER and be sure to re-enable your anti-virus, Firewall and any other security programs you had disabled.
-- If GMER crashes or keeps resulting in a BSODs, uncheck Devices on the right side before scanning.
Posted 19 February 2012 - 10:08 PM
Posted 19 February 2012 - 10:40 PM
Posted 19 February 2012 - 10:57 PM
IMPORTANT NOTE: Your scan log results indicate you are using keygens/crack tools.
The practice of using cracking tools, keygens, warez or any pirated software is not only considered illegal activity but it is a serious security risk.trendmicro.com/vinfo
Cracking applications are used for illegally breaking (cracking) various copy-protection and registration techniques used in commercial software. These programs may be distributed via Web sites, Usenet, and P2P networks.Keygen and Crack Sites Distribute VIRUX and FakeAV
...warez and crack web pages are being used by cybercriminals as download sites for malware related to VIRUT and VIRUX. Searches for serial numbers, cracks, and even antivirus products like Trend Micro yield malcodes that come in the form of executables or self-extracting files...quick links in these sites also lead to malicious files. Ads and banners are also infection vectors...University of Washington spyware study
...warez/piracy sites ranked the highest in downloading spyware...just opening the web page usually sets off an exploit, never mind actually downloading anything. And by the time the malware is finished downloading, often the machine is trashed and rendered useless.Bad Web Sites: Malware
...One of the most aggressive and intrusive of all bad websites on the Internet are serial, warez, software cracking type sites...they sneak malware onto your system...Where do trojan viruses originate? One of the biggest malware distributors on the Internet are serial/warez/code cracking sites.
When you use these kind of programs, be forewarned that some of the worst types of malware infections can be contracted and spread by visiting crack, keygen, warez and other pirated software sites. In many cases, those sites are infested with a smörgåsbord of malware and an increasing source of system infection. Those who attempt to get software for free can end up with a computer system so badly damaged that recovery is not possible and it cannot be repaired. When that happens there is nothing you can do besides reformatting and reinstalling the OS.
I strongly recommend that you remove all cracks and keygens immediately to reduce the risk of infection/reinfection. If not, then we are just wasting time trying to clean your system. Further, other tools used during the disinfection process may detect crack and keygens so we need to ensure they have been removed.
Using these types of programs or the websites visited to get them is almost a guaranteed way to get yourself infected!!
The "Objects scanned" above says 481k files - but Norton scanned 935k files, and took 3.5 hours.
The speed and ability to complete an anti-virus or anti-malware scan depends on a variety of factors.
-- Using two security scanning engines at the same time can cause each to interfere with the other, cause systems hangs, false detections, unreliable results and other unpredictable behavior.
- The program itself and how its scanning engine is designed to scan: using a signature database vs heuristic scanning or a combination of both.
- Options to scan for spyware, adware, riskware and potentially unwanted programs (PUPS).
- Options to scan memory, boot sectors, registry and alternate data streams (ADS).
- Type of scan performed: Deep, Quick or Custom scanning.
- What action has to be performed when malware is detected.
- A computer's hard drive size.
- Disk used capacity (number of files to include temporary files) that have to be scanned.
- Types of files (.exe, .dll, .sys, .cab, archived, compressed, packed, email, etc) that are scanned.
- Whether external drives are included in the scan.
- Competition for and utilization of system resources by the scanner.
- Other running processes and programs in the background.
- Interference from malware.
- Interference from the user.
-- If the screensaver, hibernation or Sleep Mode are not turned off before scanning, those features can sometimes have odd effects when attempting to resume normal mode.
Note: It is not unusual for an anti-virus or anti-malware scanner to be suspicious of some compressed, archived, .cab .jar and packed files because they have difficulty reading what is inside them. These kind of files often trigger alerts by security software using heuristic detection because they are resistant to scanning (difficult to read). This resistance may also result in some scanners to stall (hang) on these particular types of files or just ignore (skip) them. Certain files in the System Volume Information Folder like the Tracking.log (created by the Distributed Link Tracking Service to store maintenance information) have also been reported as a source causing some scanners to hang.
Posted 19 February 2012 - 10:59 PM
Posted 20 February 2012 - 02:11 PM
Posted 20 February 2012 - 02:54 PM
Posted 20 February 2012 - 03:06 PM
0 members, 0 guests, 0 anonymous users