Jump to content


 


Register a free account to unlock additional features at BleepingComputer.com
Welcome to BleepingComputer, a free community where people like yourself come together to discuss and learn how to use their computers. Using the site is easy and fun. As a guest, you can browse and view the various discussions in the forums, but can not create a new topic or reply to an existing one unless you are logged in. Other benefits of registering an account are subscribing to topics and forums, creating a blog, and having no ads shown anywhere on the site.


Click here to Register a free account now! or read our Welcome Guide to learn how to use this site.

Photo

missing drivers. (i think)


  • This topic is locked This topic is locked
9 replies to this topic

#1 car 54

car 54

  • Members
  • 335 posts
  • OFFLINE
  •  
  • Local time:07:15 AM

Posted 07 September 2011 - 10:01 PM

hello, i have a HP pavilion 05 5.1- 2600 build with windows xp professional service pack 3. system type x86
yesterday i restored it back to a july 17th restore point because it was getting slow and didn`t want to respond and was freezeing up, it seemed to work a lot better after the restore,then all at once i couldn`t get enternet explorer,then i tried the media player.i can`t get any program to load,now security anti-virus is gone.i tried to reformat but when i put the disk in it won`t load either,says there`s nothing on the disk.

the strangest part about this is this computer system has c&d partitions on it, all this happened on d partition and i`am typing this and sending it on c partition.can any one help me get the d partition back ? BTW i tried OS disk in the c drive and it wouldn`t load there either.thanks for any help and advice.

BC AdBot (Login to Remove)

 


#2 cryptodan

cryptodan

    Bleepin Madman


  • Members
  • 21,868 posts
  • OFFLINE
  •  
  • Gender:Male
  • Location:Catonsville, Md
  • Local time:11:15 AM

Posted 10 September 2011 - 05:04 AM

Hello,

And welcome to BleepingComputer.com, before we can assist you with your question of: Am I infected? You will need to perform the following tasks and post the logs of each if you can.

Malwarebytes Anti-Malware

NOTEMalwarebytes is now offering a free trial of their program, if you want to accept it you will need to enter some billing information, so that at the end of the trial you would be charged the cost of the product. Please decline this offer, if you are unable to provide billing information. If you want to try it out, then provide the billing information.

Please download Malwarebytes Anti-Malware and save it to your desktop.
Download Link 1
Download Link 2MBAM may "make changes to your registry" as part of its disinfection routine. If using other security programs that detect registry changes (ie Spybot's Teatimer), they may interfere or alert you. Temporarily disable such programs or permit them to allow the changes.

  • Make sure you are connected to the Internet.
  • Double-click on mbam-setup.exe to install the application.
    For instructions with screenshots, please refer to the How to use Malwarebytes' Anti-Malware Guide.
  • When the installation begins, follow the prompts and do not make any changes to default settings.
  • When installation has finished, make sure you leave both of these checked:
    • Update Malwarebytes' Anti-Malware
    • Launch Malwarebytes' Anti-Malware
  • Then click Finish.
MBAM will automatically start and you will be asked to update the program before performing a scan.
  • If an update is found, the program will automatically update itself. Press the OK button to close that box and continue.
  • If you encounter any problems while downloading the definition updates, manually download them from here and just double-click on mbam-rules.exe to install.
On the Scanner tab:
  • Make sure the "Perform Full Scan" option is selected.
  • Then click on the Scan button.
  • If asked to select the drives to scan, leave all the drives selected and click on the Start Scan button.
  • The scan will begin and "Scan in progress" will show at the top. It may take some time to complete so please be patient.
  • When the scan is finished, a message box will say "The scan completed successfully. Click 'Show Results' to display all objects found".
  • Click OK to close the message box and continue with the removal process.
Back at the main Scanner screen:
  • Click on the Show Results button to see a list of any malware that was found.
  • Make sure that everything is checked, and click Remove Selected.
  • When removal is completed, a log report will open in Notepad.
  • The log is automatically saved and can be viewed by clicking the Logs tab in MBAM.
  • Copy and paste the contents of that report in your next reply. Be sure to post the complete log to include the top portion which shows MBAM's database version and your operating system.
  • Exit MBAM when done.
Note: If MBAM encounters a file that is difficult to remove, you will be asked to reboot your computer so MBAM can proceed with the disinfection process. If asked to restart the computer, please do so immediately. Failure to reboot normally (not into safe mode) will prevent MBAM from removing all the malware.


SUPERAntiSpyware:

Please download and scan with SUPERAntiSpyware Free

  • Double-click SUPERAntiSypware.exe and use the default settings for installation.
  • An icon will be created on your desktop. Double-click that icon to launch the program.
  • If it will not start, go to Start > All Prgrams > SUPERAntiSpyware and click on Alternate Start.
  • If asked to update the program definitions, click "Yes". If not, update the definitions before scanning by selecting "Check for Updates". (If you encounter any problems while downloading the updates, manually download them from here. Double-click on the hyperlink for Download Installer and save SASDEFINITIONS.EXE to your desktop. Then double-click on SASDEFINITIONS.EXE to install the definitions.)
  • In the Main Menu, click the Preferences... button.
  • Click the "General and Startup" tab, and under Start-up Options, make sure "Start SUPERAntiSpyware when Windows starts" box is unchecked.
  • Click the "Scanning Control" tab, and under Scanner Options, make sure the following are unchecked (leave all others checked):
    • Ignore files larger then 4mb
    • Ignore non-executable files

    Now Perform the scan with SUPERAntiSpyware as follows:
    • Launch the program and back on the main screen, under "Scan for Harmful Software" click Scan your computer.
    • On the left, make sure you check C:\Fixed Drive.
    • On the right, under "Complete Scan", choose Perform Complete Scan and click "Next".
    • After the scan is complete, a Scan Summary box will appear with potentially harmful items that were detected. Click "OK".
    • Make sure everything has a checkmark next to it and click "Next".
    • A notification will appear that "Quarantine and Removal is Complete". Click "OK" and then click the "Finish" button to return to the main menu.
    • If asked if you want to reboot, click "Yes" and reboot normally.
    • To retrieve the removal information after reboot, launch SUPERAntispyware again.[list]
    • Click Preferences, then click the Statistics/Logs tab.
    • Under Scanner Logs, double-click SUPERAntiSpyware Scan Log.
    • If there are several logs, click the current dated log and press View log. A text file will open in your default text editor.
    • Please copy and paste the Scan Log results in your next reply.
  • Click Close to exit the program.

SAS Portable
If you have a problem downloading, installing or getting SAS to run, try downloading and using the SUPERAntiSpyware Portable Scanner instead. Save the randomly named file (i.e. SAS_1710895.COM) to a usb drive or CD and transfer to the infected computer. Then double-click on it to launch and scan. The file is randomly named to help keep malware from blocking the scanner.


Now GMER

GMER does not work in 64bit Mode!!!!!!

Please download GMER from one of the following locations and save it to your desktop:

  • Main Mirror
    This version will download a randomly named file (Recommended)
  • Zipped Mirror
    This version will download a zip file you will need to extract first. If you use this mirror, please extract the zip file to your desktop.
  • Disconnect from the Internet and close all running programs.
  • Temporarily disable any real-time active protection so your security programs will not conflict with gmer's driver.
  • Double-click on the randomly named GMER file (i.e. n7gmo46c.exe) and allow the gmer.sys driver to load if asked.
  • Note: If you downloaded the zipped version, extract the file to its own folder such as C:\gmer and then double-click on gmer.exe.

    Posted Image
  • GMER will open to the Rootkit/Malware tab and perform an automatic Full Scan when first run. (do not use the computer while the scan is in progress)
  • If you receive a WARNING!!! about rootkit activity and are asked to fully scan your system...click NO.
  • Now click the Scan button. If you see a rootkit warning window, click OK.
  • When the scan is finished, click the Save... button to save the scan results to your Desktop. Save the file as gmer.log.
  • Click the Copy button and paste the results into your next reply.
  • Exit GMER and be sure to re-enable your anti-virus, Firewall and any other security programs you had disabled.
-- If you encounter any problems, try running GMER in safe mode.
-- If GMER crashes or keeps resulting in a BSODs, uncheck Devices on the right side before scanning
.


All scans above should be performed in regular boot mode, and if that is not possible then I will post instructions in a follow up reply on how to get into Safe Mode to perform the scans. Also all scans should be COMPLETE and not quick unless specifically instructed to do so.

#3 car 54

car 54
  • Topic Starter

  • Members
  • 335 posts
  • OFFLINE
  •  
  • Local time:07:15 AM

Posted 10 September 2011 - 03:12 PM

thank you for replying
i have m bamb installed already, i have been stumbling around in the dark tryiny to get this computer to take the setup disk in c or d but it won`t load in either one.now d is hung in safe mode and i can`t do anything. it`s saying i can`t start the programs in safe mode.can you help please?



#4 cryptodan

cryptodan

    Bleepin Madman


  • Members
  • 21,868 posts
  • OFFLINE
  •  
  • Gender:Male
  • Location:Catonsville, Md
  • Local time:11:15 AM

Posted 10 September 2011 - 08:22 PM

Need the exact error message, and what applications?

#5 car 54

car 54
  • Topic Starter

  • Members
  • 335 posts
  • OFFLINE
  •  
  • Local time:07:15 AM

Posted 10 September 2011 - 09:21 PM

in computer management it says internet explorer cannot down load. internet explorer was not able to open this internet site. the requested site is either unavailable or cannot be found please try again later.
in services and aplications,performance logs and alerts it says this service cannot be started in safe mode.
thank you for helping me, and please bear with me.i don`t know anything about computers and i have to type with one fingure after i figure out what to say.thanks again.

#6 car 54

car 54
  • Topic Starter

  • Members
  • 335 posts
  • OFFLINE
  •  
  • Local time:07:15 AM

Posted 11 September 2011 - 02:25 AM

i tried to update mbamb in safe mode and this came up.

program_error_updating(11004,0 no address found. the requested name is valid and was found in the database,but it does not have the correct associated data being resolved for.

#7 cryptodan

cryptodan

    Bleepin Madman


  • Members
  • 21,868 posts
  • OFFLINE
  •  
  • Gender:Male
  • Location:Catonsville, Md
  • Local time:11:15 AM

Posted 11 September 2011 - 05:13 AM

Please follow the instructions in ==>Malware Removal and Log Section Preparation Guide<==.

Once the proper logs are created, then make a NEW TOPIC and post it ==>HERE<== Please include the link to this topic in your new topic and a description of your computer issues and what you have done to resolve them.

If you can produce at least some of the logs, then please create the new topic and explain what happens when you try to create the log(s) that you couldn't get. If you cannot produce any of the logs, then still post the topic and explain that you followed the Prep. Guide, were unable to create the logs, and describe what happens when you try to create the logs.

Once you have created the new topic, please reply back here with a link to the new topic.

Most importantly please be patient till you get a reply to your topic.

#8 Orange Blossom

Orange Blossom

    OBleepin Investigator


  • Moderator
  • 37,009 posts
  • OFFLINE
  •  
  • Gender:Not Telling
  • Location:Bloomington, IN
  • Local time:07:15 AM

Posted 11 September 2011 - 10:00 PM

Hello,

I have found your new topic here: http://www.bleepingcomputer.com/forums/topic418539.html but I see that you neglected to follow the prep. guide cryptodan linked you to in the previous post. So, to restate in a different way:

Please follow the instructions in ==>This Guide<== starting at step 6. If you cannot complete a step, skip it and continue.

Once the proper logs are created, then post them in a reply to your other topic topic here: http://www.bleepingcomputer.com/forums/topic418539.html by using the Add Reply button in that topic, not here.

If you can produce at least some of the logs, then please create the post and explain what happens when you try to create the log(s) that you couldn't get. If you cannot produce any of the logs, then still post the reply and explain that you followed the Prep. Guide, were unable to create the logs, and describe what happens when you try to create the logs.

Please note that I am not a member of the Malware Removal Team and will not be assisting you in removing the infection. I'm simply helping you to post the information they need in order to assist you.

If HelpBot replies to your topic, PLEASE follow Step One so it will report your topic to the team members.

Orange Blossom :cherry:
Help us help you. If HelpBot replies, you MUST follow step 1 in its reply so we know you need help.

Orange Blossom

An ounce of prevention is worth a pound of cure

SpywareBlaster, WinPatrol Plus, ESET Smart Security, Malwarebytes' Anti-Malware, NoScript Firefox ext., Norton noscript

#9 car 54

car 54
  • Topic Starter

  • Members
  • 335 posts
  • OFFLINE
  •  
  • Local time:07:15 AM

Posted 12 September 2011 - 01:26 AM

i`am sorry i didn`t follow the guide. i don`t know how
i `am sorry i can`t begin at step #6 and download anything,and i can`t make any logs or do any scans because this computer is hung in safe mode and some of the services are disabled and i can`t start them in safe mode ,even if i knew how

#10 Orange Blossom

Orange Blossom

    OBleepin Investigator


  • Moderator
  • 37,009 posts
  • OFFLINE
  •  
  • Gender:Not Telling
  • Location:Bloomington, IN
  • Local time:07:15 AM

Posted 12 September 2011 - 04:45 AM

Hello,

I've pasted in what you wrote into your other topic. Now that you have a topic posted here; http://www.bleepingcomputer.com/forums/topic418539.html you should NOT make further changes to your computer (install/uninstall programs, use special fix tools, delete files, edit the registry, etc) unless advised by a MRT Team member, nor should you ask for help elsewhere. Doing so can result in system changes which may not show in the log you already posted. Further, any modifications you make on your own may cause confusion for the helper assisting you and could complicate the malware removal process which would extend the time it takes to clean your computer.

From this point on the MRT Team should be the only members that you take advice from, until they have verified your log as clean.

Please be patient. It may take a while to get a response because the MRT Team members are EXTREMELY busy working logs posted before yours. They are volunteers who will help you out as soon as possible. Once you have made your post and are waiting, please DO NOT make another reply until it has been responded to by a member of the MRT Team. Generally the staff checks the forum for postings that have 0 replies as this makes it easier for them to identify those who have not been helped. If you post another response there will be 1 reply. A team member, looking for a new log to work may assume another MRT Team member is already assisting you and not open the thread to respond.

Please be patient. It may take several days to get a response but your log will be reviewed and answered as soon as possible. I advise checking your topic once a day for responses as the e-mail notification system is unreliable.

If HelpBot replies to your topic, PLEASE follow Step One so it will report your topic to the team members.

To avoid confusion, I am closing this topic. Good luck with your topic.

Orange Blossom :cherry:
Help us help you. If HelpBot replies, you MUST follow step 1 in its reply so we know you need help.

Orange Blossom

An ounce of prevention is worth a pound of cure

SpywareBlaster, WinPatrol Plus, ESET Smart Security, Malwarebytes' Anti-Malware, NoScript Firefox ext., Norton noscript




0 user(s) are reading this topic

0 members, 0 guests, 0 anonymous users