Posted 30 January 2011 - 11:04 PM
The bracket on the end of the video card (the end with the DVI connectors) should line up with holes on the back of the case where the slots allowing the DVI slots on the rear to connect to the monitor, and they should screw in there. You will have to remove a plate for the DVI ports to have access to the outside of the case, the video card will screw into the same place-and the case instruction manual will tell you specifically how to do it. As far as to the motherboard, theres a little clip on the end of the PCI express lane, make sure it is pushed down, then just slide the card into the slot, and the clip will automatically slide into place. Beyond that, there are no retention screws or anything else, just where the card screws into the back of the case and the screw is included, and the clip on the PCI express lane. Make sure you read the instructions On the motherboard when installing the video card, the top PCI express X16 lane is not always the default lane, especially with ASUS motherboards.
Primary system: Motherboard: ASUS M4A89GTD PRO/USB3, Processor: AMD Phenom II x4 945, Memory: 16 gigs of Patriot G2 DDR3 1600, Video: AMD Sapphire Nitro R9 380, Storage: 1 WD 500 gig HD, 1 Hitachi 500 gig HD, and Power supply: Coolermaster 750 watt, OS: Windows 10 64 bit.
Media Center: Motherboard: Gigabyte mp61p-S3, Processor: AMD Athlon 64 x2 6000+, Memory: 6 gigs Patriot DDR2 800, Video: Gigabyte GeForce GT730, Storage: 500 gig Hitachi, PSU: Seasonic M1211 620W full modular, OS: Windows 10.
If I don't reply within 24 hours of your reply, feel free to send me a pm.