Jump to content


 


Register a free account to unlock additional features at BleepingComputer.com
Welcome to BleepingComputer, a free community where people like yourself come together to discuss and learn how to use their computers. Using the site is easy and fun. As a guest, you can browse and view the various discussions in the forums, but can not create a new topic or reply to an existing one unless you are logged in. Other benefits of registering an account are subscribing to topics and forums, creating a blog, and having no ads shown anywhere on the site.


Click here to Register a free account now! or read our Welcome Guide to learn how to use this site.

Photo

Unknown Problem


  • Please log in to reply
15 replies to this topic

#1 lolhy22

lolhy22

  • Members
  • 29 posts
  • OFFLINE
  •  
  • Local time:03:40 AM

Posted 06 December 2010 - 11:11 AM

So at around 7am this morning my computer had froze on the desktop, i could'nt move the mouse cursor nor use the keyboard.

I then restarted and then it wouldn't boot into windows, it would just get to the login screen where i was able to login but then it would just lock up.
At first i thought ok this could be a hard drive failure so i tryed all my hard drives one by one all came back ok but it still would'nt fully boot into the dekstop altho if i turned the computer off by the plug and then on again it would boot into windows, and then freeze about 10minutes later and it would just turn my monitor off and i don't know why as the graphics card is brand new and working fine, i finally managed to get it stable for now *touches lovely wood* by using system restore and loading up a backup from 4days ago.

what i want to know is, has anyone expeirenced this before? could this be a motherboard waiting to fail?

my system specs are as follows,

Windows 7 Ultimate
i7 920
6GB ram
Gigabyte-X58-UD5 motherboard
Zotac GTX 460

Edited by lolhy22, 06 December 2010 - 11:15 AM.


BC AdBot (Login to Remove)

 


#2 lolhy22

lolhy22
  • Topic Starter

  • Members
  • 29 posts
  • OFFLINE
  •  
  • Local time:03:40 AM

Posted 06 December 2010 - 05:27 PM

just an update: have gotten 3 BSOD since my post, error codes as follows-

1- IRQL_NOT_LESS_OR_EQUAL STOP: 0x0000000A

2- pci.sys STOP: 0x0000007E

3- wdf01000.sys STOP: 0x0000007E

im at a complete loss as to what is going on/wrong :s

also in the error message to one of them is this - Bucket ID: IP_MISALIGNED

im guessing that could be ram?

Edited by lolhy22, 06 December 2010 - 05:51 PM.


#3 Broni

Broni

    The Coolest BC Computer


  • BC Advisor
  • 42,716 posts
  • OFFLINE
  •  
  • Gender:Male
  • Location:Daly City, CA
  • Local time:08:40 PM

Posted 06 December 2010 - 11:54 PM

Download BlueScreenView (in Zip file)
No installation required.
Unzip downloaded file and double click on BlueScreenView.exe file to run the program.
When scanning is done, go Edit>Select All.
Go File>Save Selected Items, and save the report as BSOD.txt.
Open BSOD.txt in Notepad, copy all content, and paste it into your next reply.

My Website

p4433470.gif

My help doesn't cost a penny, but if you'd like to consider a donation, click p22001735.gif


 


#4 lolhy22

lolhy22
  • Topic Starter

  • Members
  • 29 posts
  • OFFLINE
  •  
  • Local time:03:40 AM

Posted 07 December 2010 - 10:18 AM

==================================================
Process File : WerFault.exe
Event Name : Shut down unexpectedly
Event Time : 06/12/2010 22:08:29
User Name : All Users
Exception Code :
Exception Offset :
Fault Module Name :
Fault Module Version:
Process Path : C:\Windows\System32\WerFault.exe
Report File Size : 4,652
Report File Path : C:\Users\All Users\Microsoft\Windows\WER\ReportArchive\Kernel_0_0_cab_114115c1\Report.wer
==================================================

==================================================
Process File : WerFault.exe
Event Name : Shut down unexpectedly
Event Time : 06/12/2010 22:08:29
User Name :
Exception Code :
Exception Offset :
Fault Module Name :
Fault Module Version:
Process Path : C:\Windows\System32\WerFault.exe
Report File Size : 4,652
Report File Path : C:\ProgramData\Microsoft\Windows\WER\ReportArchive\Kernel_0_0_cab_114115c1\Report.wer
==================================================

==================================================
Process File : WerFault.exe
Event Name : Shut down unexpectedly
Event Time : 07/12/2010 02:22:16
User Name : All Users
Exception Code :
Exception Offset :
Fault Module Name :
Fault Module Version:
Process Path : C:\Windows\System32\WerFault.exe
Report File Size : 4,442
Report File Path : C:\Users\All Users\Microsoft\Windows\WER\ReportArchive\Kernel_0_0_cab_1149224e\Report.wer
==================================================

==================================================
Process File : WerFault.exe
Event Name : Shut down unexpectedly
Event Time : 07/12/2010 02:22:16
User Name :
Exception Code :
Exception Offset :
Fault Module Name :
Fault Module Version:
Process Path : C:\Windows\System32\WerFault.exe
Report File Size : 4,442
Report File Path : C:\ProgramData\Microsoft\Windows\WER\ReportArchive\Kernel_0_0_cab_1149224e\Report.wer

thats all it gives out, so not sure if thats actauly any help to you, i have the crash.dmps which have the most info.

#5 Broni

Broni

    The Coolest BC Computer


  • BC Advisor
  • 42,716 posts
  • OFFLINE
  •  
  • Gender:Male
  • Location:Daly City, CA
  • Local time:08:40 PM

Posted 07 December 2010 - 08:03 PM

Has your computer been doing fine since you used system restore?

My Website

p4433470.gif

My help doesn't cost a penny, but if you'd like to consider a donation, click p22001735.gif


 


#6 lolhy22

lolhy22
  • Topic Starter

  • Members
  • 29 posts
  • OFFLINE
  •  
  • Local time:03:40 AM

Posted 07 December 2010 - 10:00 PM

Has your computer been doing fine since you used system restore?


seems to be so far, altho it has seemed fine before and well hence the post..

iv done memory checks on both windows memory diagnostic program & memtest, and all have came back fine, the hard drives are in good health and have been tested/checked, no malware/virus as iv sorted that previously on here.

just seems to be wdf01000.sys & acpi.sys that are causing the blue screens when they happen.

#7 Broni

Broni

    The Coolest BC Computer


  • BC Advisor
  • 42,716 posts
  • OFFLINE
  •  
  • Gender:Male
  • Location:Daly City, CA
  • Local time:08:40 PM

Posted 07 December 2010 - 10:18 PM

Ehhh....just keep an eye on it and post back, if something happens :)

My Website

p4433470.gif

My help doesn't cost a penny, but if you'd like to consider a donation, click p22001735.gif


 


#8 lolhy22

lolhy22
  • Topic Starter

  • Members
  • 29 posts
  • OFFLINE
  •  
  • Local time:03:40 AM

Posted 08 December 2010 - 06:05 PM

got another couple BSOD's today,

ACPI.SYS 0X000000D1

&

0x0000007F which is - http://support.microsoft.com/kb/137539

Edited by lolhy22, 08 December 2010 - 06:19 PM.


#9 Broni

Broni

    The Coolest BC Computer


  • BC Advisor
  • 42,716 posts
  • OFFLINE
  •  
  • Gender:Male
  • Location:Daly City, CA
  • Local time:08:40 PM

Posted 08 December 2010 - 10:41 PM

Run BlueScreenView and post new log.

My Website

p4433470.gif

My help doesn't cost a penny, but if you'd like to consider a donation, click p22001735.gif


 


#10 lolhy22

lolhy22
  • Topic Starter

  • Members
  • 29 posts
  • OFFLINE
  •  
  • Local time:03:40 AM

Posted 08 December 2010 - 10:50 PM

==================================================
Process File : WerFault.exe
Event Name : Shut down unexpectedly
Event Time : 08/12/2010 22:30:15
User Name : All Users
Exception Code :
Exception Offset :
Fault Module Name :
Fault Module Version:
Process Path : C:\Windows\System32\WerFault.exe
Report File Size : 4,434
Report File Path : C:\Users\All Users\Microsoft\Windows\WER\ReportArchive\Kernel_0_0_cab_0ed91592\Report.wer
==================================================

still not giving much info, would it be easier to post whats inside the log in windbg?

Edited by lolhy22, 08 December 2010 - 11:25 PM.


#11 Broni

Broni

    The Coolest BC Computer


  • BC Advisor
  • 42,716 posts
  • OFFLINE
  •  
  • Gender:Male
  • Location:Daly City, CA
  • Local time:08:40 PM

Posted 08 December 2010 - 11:29 PM

Download System Information for Windows (SIW free version)
No installation required.

After it scans your computer, navigate to Hardware>Sensors and post all info from there.

Posted Image

My Website

p4433470.gif

My help doesn't cost a penny, but if you'd like to consider a donation, click p22001735.gif


 


#12 lolhy22

lolhy22
  • Topic Starter

  • Members
  • 29 posts
  • OFFLINE
  •  
  • Local time:03:40 AM

Posted 08 December 2010 - 11:45 PM

Sensors

Sensor Value Min Max
xxxxxx-PC
ITE IT87
Voltages
CPU VCORE 0.93 V 0.93 V 0. 0.93 V 0.93 V 0.93 V
DDR 1.52 V 1.5 1.52 V 1.52 V 1.52 V
+5V 5.13 V 5.1 5.13 V 5.16 V 5.16 V
VIN4 0.34 V 0.34 0.34 V 0.37 V 0.37 V
VIN7 2.14 V 2.14 2.14 V 2.14 V 2.14 V
VBAT 3.14 V 3.14 3.14 V 3.14 V 3.14 V
Temperatures
TMPIN0 36 C (96 F) 36 C 36 C (96 F) 36 C (96 F) 36 C (96 F)
TMPIN1 38 C (100 F) 38 C 38 C (100 F) 39 C (102 F) 39 C (102 F)
TMPIN2 44 C (111 F) 44 C 44 C (111 F) 44 C (111 F) 44 C (111 F)
Fans
FANIN2 4500 RPM 4440 R 4440 RPM 4500 RPM 4500 RPM
FANIN3 1708 RPM 1708 R 1708 RPM 1713 RPM 1713 RPM
Fans PWM
FANPWM0 0 % 0 % 0 % 0 % 0 % 0 %
FANPWM1 0 % 0 % 0 % 0 % 0 % 0 %
FANPWM2 0 % 0 % 0 % 0 % 0 % 0 %
Gigabyte DES
Voltages
CPU 0.93 V 0.9 0.93 V 0.93 V 0.93 V
Currents
CPU 5.48 A 5.4 5.48 A 6.39 A 6.39 A
Powers
CPU 5.08 W 5.0 5.08 W 5.93 W 5.93 W
Intel Core i7 920
Temperatures
Core #0 40 C (103 F) 40 C 40 C (103 F) 40 C (103 F) 40 C (103 F)
Core #1 36 C (96 F) 35 C 35 C (94 F) 36 C (96 F) 36 C (96 F)
Core #2 41 C (105 F) 41 C 41 C (105 F) 41 C (105 F) 41 C (105 F)
Core #3 35 C (94 F) 35 C 35 C (94 F) 36 C (96 F) 36 C (96 F)
Powers
Processor 49.97 W 43.76 W 4 43.76 W 49.97 W 49.97 W
NVIDIA GeForce GTX 460
Temperatures
GPU Core 42 C (107 F) 38 C ( 38 C (100 F) 42 C (107 F) 42 C (107 F)
Hitachi HDP725040GLA360
Temperatures
Assembly 37 C (98 F) 37 C ( 37 C (98 F) 37 C (98 F) 37 C (98 F)
Hitachi HDP725050GLA360
Temperatures
Assembly 36 C (96 F) 36 C ( 36 C (96 F) 36 C (96 F) 36 C (96 F)
ST3160023AS
Temperatures
Assembly 34 C (93 F) 34 C ( 34 C (93 F) 34 C (93 F) 34 C (93 F)
WDC WD5000AAKS-00V1A0
Temperatures
Assembly 37 C (98 F) 37 C ( 37 C (98 F) 37 C (98 F) 37 C (98 F)

#13 lolhy22

lolhy22
  • Topic Starter

  • Members
  • 29 posts
  • OFFLINE
  •  
  • Local time:03:40 AM

Posted 08 December 2010 - 11:47 PM

also, please note the fans - im using a watercooling setup hence the lack of fan use. (have already checked for any leaks that may have damaged anything)

#14 Broni

Broni

    The Coolest BC Computer


  • BC Advisor
  • 42,716 posts
  • OFFLINE
  •  
  • Gender:Male
  • Location:Daly City, CA
  • Local time:08:40 PM

Posted 08 December 2010 - 11:55 PM

Temps look fine.
Would you mind to start new topic in "Am I Infected?" froum?
I'd like to make sure, your computer is clean.

My Website

p4433470.gif

My help doesn't cost a penny, but if you'd like to consider a donation, click p22001735.gif


 


#15 lolhy22

lolhy22
  • Topic Starter

  • Members
  • 29 posts
  • OFFLINE
  •  
  • Local time:03:40 AM

Posted 08 December 2010 - 11:59 PM

of course i don't mind, i will create a topic there now, i already have tdsskiller so il post a scan log :]

http://www.bleepingcomputer.com/forums/topic365852.html topic created.

Edited by lolhy22, 09 December 2010 - 12:04 AM.





0 user(s) are reading this topic

0 members, 0 guests, 0 anonymous users