Welcome to BC
What are the processes that you cannot terminate?

Some types of malware will disable Malwarebytes Anti-Malware and other security tools. If MBAM will not install, try
renaming it first.
- Right-click on the mbam-setup.exe file file and rename it to mysetup.exe.
- Double-click on mysetup.exe to start the installation.
- If that did not work, then try renaming and changing the file extension. <- click this link if you do not see the file extension
- Right-click on the mbam-setup.exe file, rename it to mysetup and change the .exe extension to .scr, .com, .pif, or .bat.
- Then double-click on mysetup.scr (or whatever extension you renamed it) to begin installation.
If after installation, MBAM will not run, open the Malwarebytes' Anti-Malware folder in Program Files.
- Right-click on mbam.exe, rename it to myscan.exe.
- Double-click on myscan.exe to launch the program.
- If that did not work, then try renaming and change the .exe extension in the same way as noted above.
- Double-click on myscan.scr (or whatever extension you renamed it) to launch the program.
If using Windows Vista, refer to How to Change a File Extension in Windows Vista.Be sure to update MBAM through the program's interface (
preferable method) or manually
download the definition updates and just double-click on
mbam-rules.exe to install. Then perform a
Quick Scan in normal mode and check all items found for removal. Don't forgot to reboot afterwards.
Failure to reboot normally (not into safe mode) will prevent MBAM from removing all the malware. When done, click the
Logs tab and copy/paste the contents of the report in your next reply.
Note: MBAM uses Inno Setup instead of the Windows Installer Service to install the program. If installation fails in normal mode, try installing in safe mode. Doing this is usually not advised as MBAM is designed to be at full power when running in normal mode and loses some effectiveness for detection & removal when used in safe mode. For optimal removal, normal mode is recommended so it does not limit the abilities of MBAM. Therefore, after completing a scan it is recommended to uninstall MBAM, then reinstall it in normal mode and perform another Quick Scan.------------------------------------
The process of cleaning your computer may require you to temporarily disable some security programs.
If you are using SpyBot Search and Destroy,
please refer to Note 2 at the bottom of this page.Please download
Malwarebytes Anti-Malware Free version and save it to your desktop.
NOTE: Before saving MBAM please rename it to zztoy.exe....now save it to your desktop.alternate download link 1alternate download link 2- Make sure you are connected to the Internet.
- Double-click on mbam-setup.exe to install the application.
- When the installation begins, follow the prompts and do not make any changes to default settings.
- When installation has finished, make sure you leave both of these checked:
- Update Malwarebytes' Anti-Malware
- Launch Malwarebytes' Anti-Malware
- Then click Finish.
MBAM will automatically start and you will be asked to update the program before performing a scan.
- If an update is found, the program will automatically update itself.
- Press the OK button to close that box and continue.
- If you encounter any problems while downloading the updates, manually download them from here and just double-click on mbam-rules.exe to install.
On the Scanner tab:
- Make sure the "Perform Quick Scan" option is selected.
- Then click on the Scan button.
- If asked to select the drives to scan, leave all the drives selected and click on the Start Scan button.
- The scan will begin and "Scan in progress" will show at the top. It may take some time to complete so please be patient.
- When the scan is finished, a message box will say "The scan completed successfully. Click 'Show Results' to display all objects found".
- Click OK to close the message box and continue with the removal process.
Back at the main Scanner screen:
- Click on the Show Results button to see a list of any malware that was found.
- Make sure that everything is checked, and click Remove Selected.
- When removal is completed, a log report will open in Notepad.
- The log is automatically saved and can be viewed by clicking the Logs tab in MBAM.
- Copy and paste the contents of that report in your next reply and exit MBAM.
Note:-- If MBAM encounters a file that is difficult to remove, you may be asked to reboot your computer so it can proceed with the disinfection process. Regardless if prompted to restart the computer or not, please do so immediately.
Failure to reboot normally (not into safe mode) will prevent MBAM from removing all the malware. Note 2:-- MBAM may make changes to your registry as part of its disinfection routine. If you're using other security programs that detect registry changes (like Spybot's Teatimer), they may interfere with the fix or alert you after scanning with MBAM. Please disable such programs until disinfection is complete or permit them to
allow the changes. To disable these programs, please view this topic:
How To Temporarily Disable Your Anti-virus, Firewall And Anti-malware Programs---------------------------
Be sure to re-enable your AV and malware scan tools if they were disabled==================================
SAS, may take a long time to scan
Please download and scan with
SUPERAntiSpyware Free- Double-click SUPERAntiSypware.exe and use the default settings for installation.
- An icon will be created on your desktop. Double-click that icon to launch the program.
- If asked to update the program definitions, click "Yes". If not, update the definitions before scanning by selecting "Check for Updates". (If you encounter any problems while downloading the updates, manually download them from here. Double-click on the hyperlink for Download Installer and save SASDEFINITIONS.EXE to your desktop. Then double-click on SASDEFINITIONS.EXE to install the definitions.)
- In the Main Menu, click the Preferences... button.
- Click the "General and Startup" tab, and under Start-up Options, make sure "Start SUPERAntiSpyware when Windows starts" box is unchecked.
- Click the "Scanning Control" tab, and under Scanner Options, make sure the following are checked (leave all others unchecked):
- Close browsers before scanning.
- Scan for tracking cookies.
- Terminate memory threats before quarantining.
- Click the "Close" button to leave the control center screen and exit the program.
- Do not run a scan just yet.
First
Reboot your computer in "
Safe Mode" using the
F8 method. To do this, restart your computer and after hearing your computer beep once during startup (but before the Windows icon appears) press the F8 key repeatedly. A menu will appear with several options. Use the arrow keys to navigate and select the option to run Windows in "Safe Mode".
Scan with SUPERAntiSpyware as follows:- Launch the program and back on the main screen, under "Scan for Harmful Software" click Scan your computer.
- On the left, make sure you check C:\Fixed Drive.
- On the right, under "Complete Scan", choose Perform Complete Scan and click "Next".
- After the scan is complete, a Scan Summary box will appear with potentially harmful items that were detected. Click "OK".
- Make sure everything has a checkmark next to it and click "Next".
- A notification will appear that "Quarantine and Removal is Complete". Click "OK" and then click the "Finish" button to return to the main menu.
- If asked if you want to reboot, click "Yes" and reboot normally.
- To retrieve the removal information after reboot, launch SUPERAntispyware again.
- Click Preferences, then click the Statistics/Logs tab.
- Under Scanner Logs, double-click SUPERAntiSpyware Scan Log.
- If there are several logs, click the current dated log and press View log. A text file will open in your default text editor.
- Please copy and paste the Scan Log results in your next reply.
- Click Close to exit the program.
Note.. SAS doesn't open the registry hives for other user accounts on the system, so scans should be done from each user account.
============================
We Need to check for Rootkits with RootRepeal- Download RootRepeal from the following location and save it to your desktop.
- Direct Download (Recommended)
- Zip Mirrors (Recommended if you have a slower connection or if the Direct Download mirror is down)
- Rar Mirrors - Only if you know what a RAR is and can extract it.
- Extract RootRepeal.exe from the archive (If you did not use the "Direct Download" mirror).
- Open
on your desktop. - Click the
tab. - Click the
button. - Check all seven boxes:

- Push Ok
- Check the box for your main system drive (Usually C:), and press Ok.
- Allow RootRepeal to run a scan of your system. This may take some time.
- Once the scan completes, push the
button. Save the log to your desktop, using a distinctive name, such as RootRepeal.txt. Include this report in your next reply, please.
----------------------------------
Please note: If Rootrepeal fails to run, try this step: Click Settings - Options. Set the Disk Access slider to High
Also try: right-click on rootrepeal.exe and rename it to
tatertot.scr