Jump to content


 


Register a free account to unlock additional features at BleepingComputer.com
Welcome to BleepingComputer, a free community where people like yourself come together to discuss and learn how to use their computers. Using the site is easy and fun. As a guest, you can browse and view the various discussions in the forums, but can not create a new topic or reply to an existing one unless you are logged in. Other benefits of registering an account are subscribing to topics and forums, creating a blog, and having no ads shown anywhere on the site.


Click here to Register a free account now! or read our Welcome Guide to learn how to use this site.

Photo

BOSD


  • Please log in to reply
1 reply to this topic

#1 zg1286

zg1286

  • Members
  • 51 posts
  • OFFLINE
  •  
  • Local time:03:07 AM

Posted 03 July 2009 - 08:12 AM

I have been having a problem with BOSD
The error I get is Stop 0x000000F4 (0x00000003, 0x84958DAO, 0x84958F14, 0x805FB046)
Have checked web and all refers to hardware problem. Not sure where to start looking.
System is as follows
AMD 1.3 Processor
896 RAm
Maxtor 60 gig master
Maxtor 160 gig slave
Windows XP Po SP3
BenQ DVD
Pioneer DVD

BC AdBot (Login to Remove)

 


#2 High500

High500

  • Members
  • 75 posts
  • OFFLINE
  •  
  • Local time:08:07 AM

Posted 03 July 2009 - 09:06 AM

Hi zg1286

After a little digging I found this, might be able to help you I don't know:

SYMPTOMS
A computer that is running Microsoft Windows XP or a later operating system stops responding during resume from standby, and you receive the following KERNEL_DATA_INPAGE_ERROR stop error message:
0x0000007a (e163a3e4,c000000e,bf8e9313,0697f860)
or
0x000000F4 (0x00000003, Parameter2, Parameter3, Parameter4)
Note Parameter2, Parameter3, and Parameter4 in the stop error may vary.

This problem occurs on a computer in which Windows XP or a later operating system is installed on a hard disk that is configured as a subordinate and no other device is connected to the same IDE controller channel (primary or secondary).
Back to the top

CAUSE
This behavior may occur when you use Windows XP or a later operating system with some motherboards. Microsoft is researching this problem and will post more information in this article when the information becomes available.
Back to the top

RESOLUTION
To resolve this behavior, use one of the following methods: For Parallel Advanced Technology Attachment (PATA) hard disks, configure your disk drive as master only. For Serial Advanced Technology Attachment (SATA) hard disks, connect the hard disk cable to a master channel SATA connector on the motherboard.
Connect another device as a master, such as another disk drive or a CD drive or DVD drive.
Change your PATA and SATA IDE cable even if the cable does not appear worn.
Install Windows on a new hard disk because it is possible that your hard disk or your Windows installation may be corrupted.

Back to the top

MORE INFORMATION
Steps to reproduce the behavior
1. For PATA hard disks, set the hard disk jumper to slave mode. For SATA hard disks, connect the hard disk cable to a slave channel SATA connector on the motherboard.
2. In BIOS power management, set BIOS to S1 or S3 (STR).
3. Install Windows XP Professional with Service Pack 1 or Service Pack 2.
4. Restart the computer.
5. Set the computer to Standby.
6. Try to resume the system. The system stops responding.

Let me know!

High500




0 user(s) are reading this topic

0 members, 0 guests, 0 anonymous users