Posted 16 April 2009 - 10:42 AM
Pretty straight forward.
The "key" to the wiring is the "missing" pin on the motherboard connectors
Starting with the top row that only has 4 pins
Put the M/B switch connector on the 2 pins to the right in the picture
Put the PWR LED wires on the 2 pins on the upper left.
[If the light doesn't come on simply switch which pins the 2 wires are on.
Be sure the computer is OFF before connecting/disconnecting any wires]
On the bottom row with 5 pins
Put the reset connector on the 2&3 pins from the right
[When connected it should be even with the M/B switch connector with 1 bare pin to the right of it]
Put the HDD LED connector to the 2 pins to the left of the reset sonnector.
OCZ StealthXstream 700W,Gigabyte GA-EP45-UD3R , E8500, Arctic Freezer Pro 7, 3GB G.Skill PC8500,Gigabyte Radeon HD 4850 OC [1GB ], Seagate 250GB SATA II X2 in RAID 0, Samsung SATA DVD burner.