Jump to content


 


Register a free account to unlock additional features at BleepingComputer.com
Welcome to BleepingComputer, a free community where people like yourself come together to discuss and learn how to use their computers. Using the site is easy and fun. As a guest, you can browse and view the various discussions in the forums, but can not create a new topic or reply to an existing one unless you are logged in. Other benefits of registering an account are subscribing to topics and forums, creating a blog, and having no ads shown anywhere on the site.


Click here to Register a free account now! or read our Welcome Guide to learn how to use this site.

Photo

poping computer


  • Please log in to reply
3 replies to this topic

#1 buddyclm

buddyclm

  • Members
  • 85 posts
  • OFFLINE
  •  
  • Local time:09:22 PM

Posted 02 December 2008 - 01:32 PM

I have a friend who's computer has popped loud and then turned itself off. The computer will come back on immediately if he presses the power button on the case. The computer is a custom build computer that is only about a year old and running XP. Any ideas what could be causing the computer do to this?

BC AdBot (Login to Remove)

 


#2 buddyclm

buddyclm
  • Topic Starter

  • Members
  • 85 posts
  • OFFLINE
  •  
  • Local time:09:22 PM

Posted 22 December 2008 - 10:32 AM

UPDATE: The computer will do the loud pop and go off every couple of days. He said he first noticed it after he got DSL installed. Does anyone know if the DSL could have any effect on this? I was also wondering if it could be the power supply? Any ideas or help would be greatly appreciated. Thanks.

#3 Faz

Faz

  • Members
  • 38 posts
  • OFFLINE
  •  
  • Gender:Male
  • Location:England
  • Local time:03:22 AM

Posted 22 December 2008 - 10:40 AM

At a guess Id buy a higher Wattage PSU.

#4 dc3

dc3

    Bleeping Treehugger


  • Members
  • 30,714 posts
  • OFFLINE
  •  
  • Gender:Male
  • Location:Sierra Foothills of Northern Ca.
  • Local time:07:22 PM

Posted 22 December 2008 - 11:50 AM

The PSU would be the first place that I would check. Do you have a voltmeter? If you have a voltmeter try the following.


The purpose of this procedure is to bypass the motherboard to test the PSU.

Caution:
This procedure will involve working with live 12VDC electrical potentials which if handled improperly may lead to electrical shock. Proper precautions should also be taken to prevent electrostatic discharges (ESDs) within the case of the computer. For safety purposes please follow the instructions step by step.

First, shutdown your computer. Then unplug the power cable going into your computer.

Once you have opened the case, touch the metal of the case to discharge any static electricity.

The connector of the PSU which connects to the motherboard is readily recognizable by the number of wires in the bundle. To disconnect it you will need to press on the plastic clip to disengage it and then pull the connector up and away from the motherboard. Please take notice of the location of the locking tab and the notch on the socket of the motherboard, this will only connect one way as it is keyed. This wire bundle will have a memory of the way it has been installed and will want to bend back that direction, you may have to play around with it to find a position that the connector will stay in the same position while you run the test.

Posted Image

From the top left to right the pins are 13-24, the bottom from left to right are 1-12.


Please notice that there are PSUs with 24 pin and 20 pin connectors, the location of the green wire in the 24 pin connector is #16, and the green wire in the 20 pin connector is #14. If you look at the connector with socket side facing you and the clip on the top the number one pin will be on the bottom left corner. This makes the pin out for the 24 pin connector from left to right 13-24 on top, and 1-12 on the bottom. The pin out for the 20 pin connector from left to right is 11-20 on top , and 1-10 on the bottom. If you look at the connectors you notice that these are sockets that fit over the pins on the motherboard where the PSU cable attaches, this is where you will place the jumper. For a jumper you will need a piece of solid wire about the size of a paper clip (20-22 awg), preferably a wire with insulation. It will need to be large enough to fit firmly into the socket so that it will not need to be held in place while testing. You are at risk of electrical shock if you are holding the jumper when you power up the PSU. Insert one end of the jumper into the socket of the Green wire, and insert the other end into the socket of any Black wire.

Once the jumper is in place plug the cord back in. If the PSU is working properly the case fans, optical drives, hdds, and LEDs should power up and remain on. I would suggest that you not leave this connected any longer than is necessary for safety purposes.

At this point you can use a DC Voltage meter to read the different rail Voltages. You will want to insert the black probe into any of the Black (-) sockets, and insert the Red (+) probe in the five different colored sockets, one at a time. Below are the five different colors and their corresponding rail voltages. The Voltages should be within about ten percent plus or minus of the given values.

Yellow +12VDC

Blue -12VDC

Red +5VDC

White -5VDC

Orange +3.3VDC

To reconnect the 20/4 pin connector unplug the power cord, remove the jumper, and reconnect the connector. Take a moment at this time to make sure that nothing has been dislodged inside the case.

Family and loved ones will always be a priority in my daily life.  You never know when one will leave you.

 

 

 

 





0 user(s) are reading this topic

0 members, 0 guests, 0 anonymous users