Jump to content


 


Register a free account to unlock additional features at BleepingComputer.com
Welcome to BleepingComputer, a free community where people like yourself come together to discuss and learn how to use their computers. Using the site is easy and fun. As a guest, you can browse and view the various discussions in the forums, but can not create a new topic or reply to an existing one unless you are logged in. Other benefits of registering an account are subscribing to topics and forums, creating a blog, and having no ads shown anywhere on the site.


Click here to Register a free account now! or read our Welcome Guide to learn how to use this site.

Photo

file removal


  • Please log in to reply
5 replies to this topic

#1 leroyjoe

leroyjoe

  • Members
  • 5 posts
  • OFFLINE
  •  
  • Local time:12:44 AM

Posted 20 November 2008 - 12:08 AM

Hi everyone
I have a laptop with XP Pro with sp3.When I start up the computer I get this blue screen which says "sdearydelete program is not found skip check up". And it lasts just for a few seconds and then continues to start up. My system run great. When I googled it I found out that it is exe.file and not harmful. Also I read that it was possibly left over from some file I removed. I was wondering how I could stop this from happeninng or get some more information on this.
thanks to all of you out there..Its a great web site.
LeRoyjoe

BC AdBot (Login to Remove)

 


#2 samuel3

samuel3

  • Members
  • 2,349 posts
  • OFFLINE
  •  
  • Gender:Male
  • Local time:09:44 AM

Posted 20 November 2008 - 11:31 AM

Welcome to BC!

#3 E-Mu

E-Mu

    Bleepin' Psychopomp


  • Members
  • 1,386 posts
  • OFFLINE
  •  
  • Gender:Male
  • Location:UK
  • Local time:08:44 AM

Posted 20 November 2008 - 02:18 PM

:thumbsup: to Bleeping Computer :flowers:

Please follow the instructions below and then start a new thread here in the XP Forum with the log, hopefully MBAM will pick it up and remove it without any further action being needed.

Please download Malwarebytes Anti-Malware and save it to your desktop.

  • Make sure you are connected to the Internet.
  • Double-click on mbam-setup.exe to install the application.
  • When the installation begins, follow the prompts and do not make any changes to default settings.
  • When installation has finished, make sure you leave both of these checked:
    - Update Malwarebytes' Anti-Malware
    - Launch Malwarebytes' Anti-Malware
  • Then click Finish.
MBAM will automatically start and you will be asked to update the program before performing a scan. If an update is found, the program will automatically update itself. Press the OK button to close that box and continue.
(If you encounter any problems while downloading the updates, manually download them from here and just double-click on mbam-rules.exe to install)
  • On the Scanner tab:
  • Make sure the Perform Quick Scan option is selected.
  • Then click on the Scan button.
  • If asked to select the drives to scan, leave all the drives selected and click on the Start Scan button.
  • The scan will begin and "Scan in progress" will show at the top. It may take some time to complete so please be patient.
  • When the scan is finished, a message box will say "The scan completed successfully. Click 'Show Results' to display all objects found".
  • Click OKto close the message box and continue with the removal process.
  • Back at the main Scanner screen, click on the Show Results button to see a list of any malware that was found.
  • Make sure that everything is checked, and click Remove Selected.
  • When removal is completed, a log report will open in Notepad.
  • The log is automatically saved and can be viewed by clicking the Logs tab in MBAM.
  • Copy and paste the contents of that report in your next reply and exit MBAM.
Note: If MBAM encounters a file that is difficult to remove, you may be asked to reboot your computer so it can proceed with the disinfection process. Regardless if prompted to restart the computer or not, please do so immediately. Failure to reboot normally (not into safe mode) will prevent MBAM from removing all the malware. MBAM may make changes to your registry as part of its disinfection routine. If you're using other security programs that detect registry changes, they may alert you after scanning with MBAM. Please permit the program to allow the changes.


~ E-Mu ~

"Emu, You Moo, We All Moo for Emu!" <-- Thanks to Animal

"If at first you don't succeed; call it version 1.0"


#4 nigglesnush85

nigglesnush85

  • Members
  • 4,371 posts
  • OFFLINE
  •  
  • Gender:Male
  • Location:UK
  • Local time:08:44 AM

Posted 20 November 2008 - 03:26 PM

Hello and welcome.
Regards,

Alan.

#5 leroyjoe

leroyjoe
  • Topic Starter

  • Members
  • 5 posts
  • OFFLINE
  •  
  • Local time:12:44 AM

Posted 29 November 2008 - 03:04 AM

thanks for your time and advice. I ran the malware and I came back with no problems.

#6 leroyjoe

leroyjoe
  • Topic Starter

  • Members
  • 5 posts
  • OFFLINE
  •  
  • Local time:12:44 AM

Posted 20 December 2008 - 04:27 AM

:thumbsup: to Bleeping Computer :flowers:

Please follow the instructions below and then start a new thread here in the XP Forum with the log, hopefully MBAM will pick it up and remove it without any further action being needed.

Please download Malwarebytes Anti-Malware and save it to your desktop.

  • Make sure you are connected to the Internet.
  • Double-click on mbam-setup.exe to install the application.
  • When the installation begins, follow the prompts and do not make any changes to default settings.
  • When installation has finished, make sure you leave both of these checked:
    - Update Malwarebytes' Anti-Malware
    - Launch Malwarebytes' Anti-Malware
  • Then click Finish.
MBAM will automatically start and you will be asked to update the program before performing a scan. If an update is found, the program will automatically update itself. Press the OK button to close that box and continue.
(If you encounter any problems while downloading the updates, manually download them from here and just double-click on mbam-rules.exe to install)
  • On the Scanner tab:
  • Make sure the Perform Quick Scan option is selected.
  • Then click on the Scan button.
  • If asked to select the drives to scan, leave all the drives selected and click on the Start Scan button.
  • The scan will begin and "Scan in progress" will show at the top. It may take some time to complete so please be patient.
  • When the scan is finished, a message box will say "The scan completed successfully. Click 'Show Results' to display all objects found".
  • Click OKto close the message box and continue with the removal process.
  • Back at the main Scanner screen, click on the Show Results button to see a list of any malware that was found.
  • Make sure that everything is checked, and click Remove Selected.
  • When removal is completed, a log report will open in Notepad.
  • The log is automatically saved and can be viewed by clicking the Logs tab in MBAM.
  • Copy and paste the contents of that report in your next reply and exit MBAM.
Note: If MBAM encounters a file that is difficult to remove, you may be asked to reboot your computer so it can proceed with the disinfection process. Regardless if prompted to restart the computer or not, please do so immediately. Failure to reboot normally (not into safe mode) will prevent MBAM from removing all the malware. MBAM may make changes to your registry as part of its disinfection routine. If you're using other security programs that detect registry changes, they may alert you after scanning with MBAM. Please permit the program to allow the changes.






0 user(s) are reading this topic

0 members, 0 guests, 0 anonymous users