All of the errors that you've mentioned appear to relate to hardware issues. Have you installed any new hardware recently?
STOP 0x7f: http://www.osronline.com/ddkx/ddtools/bccodes_0ug7.htm
STOP 0x8e: http://www.osronline.com/ddkx/ddtools/bccodes_59k7.htm
STOP 0x50: http://www.osronline.com/ddkx/ddtools/bccodes_4qsn.htm
I've seen quite a few of the STOP 0x7f errors in the last several days. The first parameter of the error message refers to memory access by an appliction. Add to this the STOP 0x8e parameter (which is a memory access violation). The STOP 0x50 message is also a memory access problem.
The things I would suspect:
1) New hardware or software installed
3) Corrupted drivers
4) Damaged hardware/Memory (either RAM or pagefile)
Now, add to this the unknown device with IDE stuff in it (that's most likely the controller on the motherboard for interfacing with your hard drive) and I'd have to suspect an issue with your motherboard. The easiest thing to try would be to update your motherboard/chipset drivers to see if this fixes the problem. Please provide us with the make and model of your system so we can locate the appropriate drivers for it. If it's a custom build, we'll need the make and model of the motherboard to find the drivers.
My browser caused a flood of traffic, sio my IP address was banned. Hope to fix it soon. Will get back to posting as soon as Im able. - John
(my website: http://www.carrona.org/
)**If you need a more detailed explanation, please ask for it. I have the Knack
. ** If I haven't replied in 48 hours, please send me a message. My eye problems have recently increased and I'm having difficult reading posts. (23 Nov 2017)FYI - I am completely blind in the right eye and ~30% blind in the left eye.
<p>If the eye problems get worse suddenly, I may not be able to respond.If that's the case and help is needed, please PM a staff member for assistance.