How to use Vista's Complete PC Backup and Restore utility

  • February 23, 2007
  • 04:59 PM
  • Read 454,298 times
 

Table of Contents

  1. Introduction
  2. How to backup your computer to a Complete PC Backup and Restore image
  3. How to restore your computer from a Complete PC Backup and Restore Image
  4. Conclusion

Introduction

Windows Vista Business, Ultimate, and Enterprise come with a more advanced backup and restore utility called Windows Complete PC Backup and Restore. This program allows you to create an entire backup of your computer that can be used to restore your computer in the case of system-wide failure. Unlike the standard backup and restore feature that comes with all the versions of Windows Vista, Windows Complete PC Backup and Restore allows you to not only restore your data but also the complete operating system and other critical system files.

This Vista disaster recovery option works by creating an image of the selected hard drives and saving this image to either multiple DVDs or to another hard drive. In the event that your computer is no longer able to boot into Windows Vista, you can then restore these snapshots using the Windows Recovery Environment.

How to backup your computer to Complete PC Backup and Restore image

To create a Complete PC Backup image for your computer you need to enter the Backup and Restore Center. To begin please follow these instructions:

  1. Click on the Start button to open your Start Menu. The Start button looks like this: Vista Start Button
     
  2. Click on the All Programs menu option.
     
  3. Click on the Maintenance folder.
     
  4. Click on the Backup and Restore Center icon.

When you click on that icon, the Backup and Restore Center will open as shown in Figure 1 below.

 

 

Vista Backup and Restore Center
Figure 1. Vista Backup and Restore Center

 

From this screen, you would be able to see the last time you performed a Complete PC Backup and where it was saved to under the Back up files or your entire computer category. As this is the first time you are making a Complete PC Backup, you will not see this information. To start the Complete PC Backup utility you need to click on the Back up computer button. When you press that button, if a User Account Control prompt may appear you should click on the Continue button. A new screen will appear asking where you would like to save the backup image.
 

Select the location to save the backup image
Figure 2. Select the location to save the backup image

 

You have two options as to where you can save the backup image; a hard drive formatted using NTFS or a writable DVD. I suggest when making backups that you save the image to a DVD or to an external backup hard drive. If you save the image on a system hard drive, and that drive fails, then you no longer have access to the image to restore it. On the other hand, if you save the image to a DVD or external hard drive, then you can store it in a safe place and use it to restore the computer when needed. For this example, I am selecting the On a hard disk as I have an external drive plugged into the computer. If you had selected the On one or more DVDs option you would be able to select the drive letter for your DVD writer. When ready, click on the Next button.

If the destination that you have chosen does not have enough free space to store the image, or if it requires multiple DVDs, then the Windows Complete PC Backup wizard will show you a screen where you can select the drives that you would like to backup. An example of this type of screen can be seen in Figure 3 below. Please note that the screenshot below was taken from a different computer, so does not reflect the actual back up we are doing. The screenshot is only shown so that you understand what this window is when it is shown.

 

Select disks to backup
Figure 3. Select disks to backup

 


For each disk that you would like to backup, put a checkmark next to it. Those disks that are considered system disks will automatically be checked and cannot be unchecked. It is important to note that you cannot backup a drive that is being used to save the image. When you have selected all the disks you want to backup click on the Next button. If your selected backup device has enough free space to store the image, or after you press Next in the disk selection screen, you will be presented with a summary screen for the backup you are about to perform.

 

Confirm your backup settings
Figure 4. Confirm your backup settings

 

To start the backup you should now click on the Start Backup button. When you press this button, Vista will start the backup and create an image on the media or hard drive that you specified. The status of the backup creation will be shown in a window similar to Figure 5 below.

 

Creating backup image
Figure 5. Creating backup image

 

When the backup is finished being created you will see a message stating so as shown in Figure 6 below.
 

Backup image successfully created
Figure 6. Backup image successfully created

 


Your computer has now been successfully backed up and you should store the media or external drive in a safe location in the event that you need it in the future. In the future when you make further Complete PC Backups to the same drive, it will only backup the differences between your last backup and the current state of your computer allowing the backups to complete much quicker.
 

How to restore your computer from a Complete PC Backup and Restore Image

Once you have made a Complete PC Backup you can restore that backup at any time. When restoring a Complete PC Backup it is important to know that the restore process will erase all of hard disks and all of the user data and programs will be erased and replaced with the data and programs from the backup. If you understand this warning, and feel that you need to restore a backup, then continue reading. If you have any doubts at all about how this process works, please ask us in the Windows Vista help forums. It is better to be safe than sorry when there is a chance you may lose all of your data.

If you still want to perform the restore, then you need to start the restore process from the System Recovery Options menu in the Windows Recovery Environment. Instructions and information on how to access the Windows Recovery Environment and the System Recovery Options menu can be found in the following tutorial: Using Windows Complete PC Restore to restore your computer.

Conclusion

Now that you understand how Complete PC Backup and Restore works, it is advised that you create your first Complete PC Backup and store it somewhere safe. This provides peace of mind because you know that if there is a problem in the future you have a perfect installation that you can easily restore. As always, if you need help with or want to talk about Complete PC Backup and Restore, then feel free to ask us in our Windows Vista Help Forums.

Users who read this also read:

  • Using Windows Vista Complete PC Restore to restore your computer Image
    Using Windows Vista Complete PC Restore to restore your computer

    If you are an owner of Windows Vista Business, Ultimate, or Enterprise then you have access to a feature called Complete PC Backup and Restore. This feature allows you to create backup images of your computer so that you can do a system-wide restore in the case of complete system failure. This allows you to not only restore user data and programs, but also the entire operating system onto new or ...

  • How to automatically repair Windows Vista using Startup Repair Image
    How to automatically repair Windows Vista using Startup Repair

    Windows Vista comes with a rich feature set of diagnostic and repair tools that you can use in the event that your computer is not operating correctly. These tools allow you to diagnose problems and repair them without having to boot into Windows. This provides much greater flexibility when it comes to fixing problems that you are not able to resolve normally. This guide focuses on using the ...

  • Windows Vista System Restore Guide Image
    Windows Vista System Restore Guide

    System Restore is a system recovery feature of Windows that creates snapshots, or restore points, of the state of your computer at various intervals or before you perform a certain task. These restore points can then be used to restore your computer back to the state it was in when they were taken. When these restore points are created, and restored, the only files affected are the Windows ...

  • How to Backup and Restore your hard drive with DriveImage XML Image
    How to Backup and Restore your hard drive with DriveImage XML

    DriveImage XML is my program of choice for backing up and protecting my data. When I first began using this application, though, I had some difficulties restoring my backup image on my test boxes using the instructions found in other tutorials. Due to this, I pooled info from a variety of available tutorials, and with some work, I was able to figure out how to restore my data. With this in mind, I ...

  • Cleaning the Interior of your PC Image
    Cleaning the Interior of your PC

    Most people think computers, being electronic devices, don't require any mechanical maintenance, but this is not so. Many computer faults are caused by components overheating due to poor airflow in the case because of a buildup of dirt and dust over time. It's worthwhile cleaning your computer annually or even more often if it is in a particularly dusty environment, on carpet or in a ...

 

Comments:

blog comments powered by Disqus

Login

Remember Me
Sign in anonymously