BleepingComputer.com: Project Help

Im just wondering if any of you had ever done a project on automation/electronics/mechanical before? I need to think of a project that i'll be doing for a whole year, so i need some ideas from you guys.

I usually ask this stuff from those hacking forums i joined, but after so long i haven't been active on those sites, my accounts are dead. And i don't have the intention to create a new one. So, i ask myself, why dont i ask you guys?

I hope you could give me the details of the project also, so i could u/stand it better. If not, just raw ideas would be appreciated too.

Waiting for your ideas mates!

P/s: Come to think of it, im kind of an exiled hacker!

It might help if you clarified exactly what the project was. "Automation/electronics/mechanical" is certainlya very broad topic.
Regards,
John

Thanks for replying John. Actually, i could do any project under those theme. Meaning, i can choose to do automation, electronics OR mechanical. So any ideas around that topic will do.

For example, in automation, i could possibly do the GRAFCET program for bottling purposes.

Like i said, anything will do. But, if you have any details about it, it'll be more helpful.

Thanks again for replying.

Fairuz

This post has been edited by jbmoisin: 10 February 2006 - 06:23 AM

Do you have to do the actual project, or do you have to use MS Project to detail how it would be done?
Cheers,
John

Well, normally i have to do the project. If it's a big project, like rockets modelling, i still have to make the prototype.

So, yes, i have to do the project.

But need to tell you that, i have to use our ( my group consist of 3 person) own money. So, hopefully it doesn't cost more than 200€. Unless it's really an interesting project, then i maybe could try to get some financial support from local companies.

This post has been edited by jbmoisin: 10 February 2006 - 01:00 PM

Some good info on alotta stuff are at:

http://www.wikipedia.org

Type in 1 keyword and go.