BleepingComputer.com: Google Redirect Virus

I tried using the TDSSKiller.exe, but to no avail. I have read through Bleeping Computer's instructions regarding this problem, but I remain unable to eliminate this virus. What are my options/next steps?

This post has been edited by boodiggly: 04 November 2011 - 10:33 AM

Hello and welcome.

Please download MiniToolBox, save it to your desktop and run it.

Checkmark the following checkboxes:

• Flush DNS
  
• Report IE Proxy Settings
  
• Reset IE Proxy Settings
  
• Report FF Proxy Settings
  
• Reset FF Proxy Settings
  
• List content of Hosts
  
• List IP configuration
  
• List Winsock Entries
  
• List last 10 Event Viewer log
  
• List Installed Programs
  
• List Users, Partitions and Memory size.
  
• List Minidump Files

Click Go and post the result (Result.txt). A copy of Result.txt will be saved in the same directory the tool is run.

Note: When using "Reset FF Proxy Settings" option Firefox should be closed.


TDSSKiller from Command Prompt

Use the following command to scan the PC with a detailed log written into the file report.txt (created in the TDSSKiller.exe utility folder):
Open Command Prompt in XP = click Start >> Run,type cmd
copy and paste this at the flashing cursor and hit Enter

TDSSKiller.exe -l report.txt

OR
Please, try to use attached version of TDSSKiller

tdsskiller.zip
?>?>?>?>?>??>?>?
TDSS ALT

Download the FixTDSS.exe

Save the file to your Windows desktop.
Close all running programs.
If you are running Windows XP, turn off System Restore. How to turn off or turn on Windows XP System Restore
Double-click the FixTDSS.exe file to start the removal tool.
Click Start to begin the process, and then allow the tool to run.
Restart the computer when prompted by the tool.
After the computer has started, the tool will inform you of the state of infection (make sure to let me know what it said)
If you are running Windows XP, re-enable System Restore.





Next run MBAM (MalwareBytes):

Please download Malwarebytes Anti-Malware and save it to your desktop.

Download Link 1
Download Link 2

MBAM may "make changes to your registry" as part of its disinfection routine. If using other security programs that detect registry changes (ie Spybot's Teatimer), they may interfere or alert you. Temporarily disable such programs or permit them to allow the changes.

• Make sure you are connected to the Internet.
  
• Double-click on mbam-setup.exe to install the application.
  For instructions with screenshots, please refer to the How to use Malwarebytes' Anti-Malware Guide.
  
• When the installation begins, follow the prompts and do not make any changes to default settings.
  
• When installation has finished, make sure you leave both of these checked:
  • Update Malwarebytes' Anti-Malware
    
  • Launch Malwarebytes' Anti-Malware
  
  
• Then click Finish.

MBAM will automatically start and you will be asked to update the program before performing a scan.

• If an update is found, the program will automatically update itself. Press the OK button to close that box and continue.
  
• If you encounter any problems while downloading the definition updates, manually download them from here and just double-click on mbam-rules.exe to install.

On the Scanner tab:

• Make sure the "Perform Quick Scan" option is selected.
  
• Then click on the Scan button.
  
• If asked to select the drives to scan, leave all the drives selected and click on the Start Scan button.
  
• The scan will begin and "Scan in progress" will show at the top. It may take some time to complete so please be patient.
  
• When the scan is finished, a message box will say "The scan completed successfully. Click 'Show Results' to display all objects found".
  
• Click OK to close the message box and continue with the removal process.

Back at the main Scanner screen:

• Click on the Show Results button to see a list of any malware that was found.
  
• Make sure that everything is checked, and click Remove Selected.
  
• When removal is completed, a log report will open in Notepad.
  
• The log is automatically saved and can be viewed by clicking the Logs tab in MBAM.
  
• Copy and paste the contents of that report in your next reply. Be sure to post the complete log to include the top portion which shows MBAM's database version and your operating system.
  
• Exit MBAM when done.

Note: If MBAM encounters a file that is difficult to remove, you will be asked to reboot your computer so MBAM can proceed with the disinfection process. If asked to restart the computer, please do so immediately. Failure to reboot normally (not into safe mode) will prevent MBAM from removing all the malware.

Troubleshoot Malwarebytes' Anti-Malware

Hello,

Now that you have posted a log here: http://www.bleepingcomputer.com/forums/topic426748.html you should NOT make further changes to your computer (install/uninstall programs, use special fix tools, delete files, edit the registry, etc) unless advised by a MRT Team member, nor should you ask for help elsewhere. Doing so can result in system changes which may not show in the log you already posted. Further, any modifications you make on your own may cause confusion for the helper assisting you and could complicate the malware removal process which would extend the time it takes to clean your computer.

From this point on the MRT Team should be the only members that you take advice from, until they have verified your log as clean.

Please be patient. It may take a while to get a response because the MRT Team members are EXTREMELY busy working logs posted before yours. They are volunteers who will help you out as soon as possible. Once you have made your post and are waiting, please DO NOT make another reply until it has been responded to by a member of the MRT Team. Generally the staff checks the forum for postings that have 0 replies as this makes it easier for them to identify those who have not been helped. If you post another response there will be 1 reply. A team member, looking for a new log to work may assume another MRT Team member is already assisting you and not open the thread to respond.

Please be patient. It may take several days to get a response but your log will be reviewed and answered as soon as possible. I advise checking your topic once a day for responses as the e-mail notification system is unreliable.

If HelpBot replies to your topic, PLEASE follow Step One so it will report your topic to the team members.

To avoid confusion, I am closing this topic. Good luck with your log.

Orange Blossom