Help
I have a dell inspiron 6000 with a intel pro/wireless 200bg network card. the driver went corrupt for whatever reason. I have tryed a rollback on the driver- no roll back to go to . i have gone to the dell web site for drivers. downloaded the driver (only one i could find) for 2200bg and installed it and the wireless card still wont work. any thoughts on what to try next ?
Page 1 of 1
No Drivers work for Wireless card Cant find a driver that will work.
#1
- New Member
-
- Group: Members
- Posts: 14
- Joined: 27-September 11
- Gender:Male
- Location:valdosta
Posted 27 September 2011 - 02:54 PM
FREDROCK
Back to top
#2
- Member
-
- Group: Members
- Posts: 37
- Joined: 27-September 11
Posted 27 September 2011 - 03:02 PM
Did you try putting the service tag number in on Dell's support site? http://support.dell.com/support/downloads/index.aspx?c=us&cs=19&l=en&s=dhs
#3
- New Member
-
- Group: Members
- Posts: 14
- Joined: 27-September 11
- Gender:Male
- Location:valdosta
Posted 27 September 2011 - 03:04 PM
yes i did
FREDROCK
#4
- Member
-
- Group: Members
- Posts: 37
- Joined: 27-September 11
Posted 27 September 2011 - 03:11 PM
http://support.dell.com/support/downloads/download.aspx?c=us&cs=19&l=en&s=dhs&releaseid=R155386&SystemID=INS_PNT_6000&servicetag=&os=WW1&osl=en&deviceid=5896&devlib=0&typecnt=0&vercnt=7&catid=-1&impid=-1&formatcnt=0&libid=5&typeid=-1&dateid=-1&formatid=-1&source=-1&fileid=207280
Try that one yet?
What is the error in Device Manager?
Try that one yet?
What is the error in Device Manager?
#5
- New Member
-
- Group: Members
- Posts: 14
- Joined: 27-September 11
- Gender:Male
- Location:valdosta
Posted 27 September 2011 - 03:14 PM
yes that was the first one of 2 that i have found from dell's website. the error is " this device cannot start code 10"
FREDROCK
#6
- Member
-
- Group: Members
- Posts: 37
- Joined: 27-September 11
Posted 27 September 2011 - 03:19 PM
This may not be a driver issue it may be an actual hardware failure. Do you have a switch or function ket that enables/disables the wirless card? I would make sure that is ok. Then I would try to remove it from device manager and just reboot to see if it pulls the original driver from the driver repository.
#7
- New Member
-
- Group: Members
- Posts: 14
- Joined: 27-September 11
- Gender:Male
- Location:valdosta
Posted 27 September 2011 - 03:21 PM
ok i will try that.
FREDROCK
#8
- Member
-
- Group: Members
- Posts: 37
- Joined: 27-September 11
Posted 27 September 2011 - 03:22 PM
http://support.microsoft.com/mats/hardware_device_problems/en-us
You can also run the automated tool from Microsoft it sometimes will find the issue and at least give us a direction to go.
You can also run the automated tool from Microsoft it sometimes will find the issue and at least give us a direction to go.
#9
- New Member
-
- Group: Members
- Posts: 14
- Joined: 27-September 11
- Gender:Male
- Location:valdosta
Posted 27 September 2011 - 03:26 PM
seems that the actual card is bad in fact. looks like ill have to replace it for them Thanks Nunos!!!!!!!!
FREDROCK
#10
- Member
-
- Group: Members
- Posts: 37
- Joined: 27-September 11
Posted 27 September 2011 - 03:27 PM
Glad I could help. Good luck with the replacement. 
#11
- New Member
-
- Group: Members
- Posts: 14
- Joined: 27-September 11
- Gender:Male
- Location:valdosta
Posted 27 September 2011 - 03:29 PM
Thanks !! 
FREDROCK
#12
- Member
-
- Group: Members
- Posts: 104
- Joined: 03-February 11
Posted 27 September 2011 - 04:15 PM
great advice above... function[f2] is the keyboard switch.
wow, i should really refresh before i post.
wow, i should really refresh before i post.
This post has been edited by cogs10: 27 September 2011 - 04:16 PM
Share this topic:
Page 1 of 1