BleepingComputer.com: CMOS Button

Hey guys, i have a gigabyte ga-x58a-ud3r motherboard. i wanted to reset my cmos for reasons i wont get in to. i have never reset cmos before. and after doing some research, i realized there was a cmos_clr button on my motherboard near the USB ports. so i unplugged everything and pressed the button, waited a few minutes, then plugged everything back in and booted. this is my first boot after reseting it, and the button is lit up now. i am wondering if this is normal? or do i have to press it again? or what? and btw i went into the BIOS after resetting and used the option "Load Fail-Safe Defaults" before booting.
thanks

EDIT: I turned off the computer and the light still remains on. And i restarted it and it is still on. Im still not sure if this is normal or i should press it again or what..

This post has been edited by soulshard: 10 December 2010 - 03:17 PM

Depending on the revision number of the mobo. The proper manual can be found here for Rev.1 and here for Rev.2

Always handy to have for many reasons.