BleepingComputer.com: How To Connect To Remote Computer

Ok, I'm a little out of practice with this stuff... I have another home with a desktop computer. It's attached through DSL. My primary home computer is attached through cable modem -- don't know if this matters. I tried to telnet to the secondary computer's IP address, but can't connect. Am I supposed to attach through the router? Or am I trying to do something I can't do? Is there an easier way to get these computers to 'speak' to each other? Thanks for any help!

I haven't tried it but I've heard gotomypc all over the radio. I think it's www.gotomypc.com.

The cable modem-dsl thing doesn't matter. What errors, if any are you seeing?

Your other computer might have the telnet port shut off. I don't think Windows PCs start the telnet server by default. Go to start -> run -> and type services.msc to see what serrvices are running. Search for the status of the service called 'telnet'. It should be 'running' or 'started' or something to that effect.

I asssumed that you were on a Windows PC(the version doesn't matter as much as Windows v Linux v Mac)

You need to port forward your target computer. There is a free service, http://www.No-IP.com , that will allow you to connect like you want. You probably have Dynamic IP addresses on both your DSL and cable service. That is not a problem with the free service. They will provide free software to resolve that issue. You ISPs will also no doubt block port 80, but there is a work around for that too.
Here is a second resource to help with problems... PortForward.com. It is a complete online easy to use resource for the issue.


Hope this helps.

Thanks so much for the advice. It very well could be the service not started. I looked at this machine and it says startup type is 'Manual' with nothing under 'Status', so I guess I can execute the command from here, but if the service is not started on the other machine, it won't accept it? I used to do UNIX Systems Administration (ok, 10 years ago), but things are not quite the same on a PC and, yes, I'm a tad rusty.

It did concern me that I also cannot PING the other machine. I realized (after reading some other posts) that the other machine is DHCP enabled. So does that mean the IP address I'm trying to attach to may have changed? Is there another way to do this? In UNIX I had a hosts file but I'm not real sure it works the same way here. Also, you're right. I am on a Windows XP Operating System.

acklan, on Nov 30 2005, 02:42 PM, said:

I'll check this out right away! I hope I understand it... I need to brush up on my 'tech talk'! Thanks!

It is easy to create a bridge between the computers. Try using this remote access software, it has lot of useful features and it is free from IP/Proxy issues.

NO-IP has the same features but a free verison.