BleepingComputer.com: Auto Detect/Auto Mount Raid 5 Array in 10.04

I can Manually mount our 12TB Raid 5 Array, but after following the directions found here Linkity Goodness When Ubuntu reboots I get a message on the load screen that says the Disk Drive for /Media is not yet ready or may not be present. Anyone have any ideas this is just a software raid and I didn't figure with a gui to set it up it should be this hard to work. Eh win some you lose some.

Thanks in Advance.
-Bar

Here is the MDADM.CONF line that I edited

# definitions of existing MD arrays
ARRAY /dev/md0 UUID=c88ca4e1:595bae80:634e5ec6:355772fc

and also the FSTAB addition that I nearly missed as the reference in the post is so small...

dev/md0 /media/LargeVolume ext3 user,auto 0 0

Again any help much appreciated

-Bar

Just another Update after changing this line

dev/md0 /media/LargeVolume ext3 user,auto 0 0

To This

dev/md0 /media ext3 user,auto 0 0

I now on boot only get a message that says there was an error trying to mount to /media. Hmmmmm