Trendnet TEW-632BRP firmware upgrade.

BleepingComputer.com: Trendnet TEW-632BRP firmware upgrade.

Page 1 of 1

You cannot start a new topic
You cannot reply to this topic

Trendnet TEW-632BRP firmware upgrade.

#1 MJPC

New Member

Group: Members
Posts: 9
Joined: 07-May 10
Gender:Male
Location:Estonia

Posted 13 May 2010 - 04:50 AM

Hello, i would like to upgrade my Trendnet TEW-632BRP firmware to dd-wrt, but where can i find it ? :thumbsup:

I have read that it is much better than trendnet original firmware.

#2 Orecomm

Forum Regular

Group: Members
Posts: 181
Joined: 10-February 10
Gender:Male
Location:Roseburg, Oregon

Posted 15 May 2010 - 10:12 PM

Go HERE and enter your router model number. It will pop up a link for the latest DD-WRT image for your model. READ THE INSTRUCTIONS and visit the "Community" chat boards before you start. You need the "factory-to-ddwrt" version to flash from the Trendnet GUI, then the other straight "model-firmware.bin" file to upgrade once the unit has been flashed the first time. You can easily turn your router into a doorstop by missing a step and neither Trendnet, the DD-WRT folks, nor myself will accept any responsibility if that happens. Also a word of advice, do NOT set the transmit power to max and expect a great signal. Most home routers operate very poorly at max output. Back off about 3 db for much better results.