Help
I have had the Pixma for 2 years without an issue. Then it just would not be recognized by XP, telling me the printer was offline or connection to USB port was not recognized. It was suggested that the cable was faulty and upon replacement that solved the issue. Now 3 months later I again start receiving the same warning. Will try another cable but could this be some thing else?
Thanks.
Page 1 of 1
Cannon Pixma printer Cable problem with the Pixma MP510
Back to top
#2
- Computer Masochist
-
- Group: Staff Emeritus
- Posts: 27,809
- Joined: 27-January 07
- Location:Cleveland, Ohio
Posted 04 February 2010 - 01:49 PM
Did you check your Device Manager for any yellow exclamation points, red X's or question marks?
If you have one by the USB controller delete that device and reboot the computer
Windows should re-detect them
If you have one by the USB controller delete that device and reboot the computer
Windows should re-detect them
Mark
why won't my laptop work?
Having grandkids is God's way of giving you a 2nd chance because you were too busy working your butt off the 1st time around
Do not send me PMs with problems that should be posted in the forums. Keep it in the forums, so everyone benefits
Become a BleepingComputer fan: Facebook and Twitter
why won't my laptop work?
Having grandkids is God's way of giving you a 2nd chance because you were too busy working your butt off the 1st time around
Do not send me PMs with problems that should be posted in the forums. Keep it in the forums, so everyone benefits
Become a BleepingComputer fan: Facebook and Twitter
Share this topic:
Page 1 of 1