BleepingComputer.com: over clocked

over clocked my celeron from 2.93ghz to 3.5ghz is this a safe speed for this CPU here is a txt .1report from CPU-z 1.53.1
Processor 1 ID = 0
Number of cores 1 (max 1)
Number of threads 1 (max 1)
Name Intel Celeron 340
Codename Prescott
Specification Intel® Celeron® CPU 2.93GHz
Package (platform ID) Socket 478 mPGA (0x2)
CPUID F.3.4
Extended CPUID F.3
Core Stepping D0
Technology 90 nm
Core Speed 3500.0 MHz
Multiplier x FSB 22.0 x 159.1 MHz
Rated Bus speed 636.4 MHz
Stock frequency 2933 MHz
Instructions sets MMX, SSE, SSE2, SSE3
L1 Data cache 16 KBytes, 8-way set associative, 64-byte line size
Trace cache 12 Kuops, 8-way set associative
L2 cache 256 KBytes, 4-way set associative, 64-byte line size
FID/VID Control no

thegodgen, on Jan 31 2010, 04:17 PM, said:

Is the max CPU voltage within manufacturer's spec?

Is the CPU's temp at safe limits when under load/stress?

Is the system stable?

If yes, then you are good to go.

This post has been edited by dpunisher: 31 January 2010 - 06:44 PM

yes intel max v-core for this cpu is 1.4v temp under 100% load 45c max thermal 75c 100% stable under prime 95 and some pretty good benchmark tests Processor Benchmark >>>

> CPUIDMark MIPS (x86-32 Integer) : 14438.25 Marks

> CPUIDMark M Flops Single Precision (x86-32 Float) : 10496.60 Marks

> CPUIDMark M Flops Double Precision (x86-32 Float) : 5248.30 Marks

> CPUIDMark Mandelbrot Parallelized (x86-32) : 8276.30 Marks (in MIPS)

This post has been edited by thegodgen: 31 January 2010 - 07:37 PM

update ran prime 95 (cpu burnin / s tester ) for 8hrs and 54mins last nite 0 errors 0 warnings mean temp (average) 44c max MIPS 14,565 whetstone x86 integer 10,000 m flops (Single Precision) (x-86 float)

just got my p4 2.8ghz in the mail today 800mhz fsb 1mb l2 oced to 3.78ghz