Hi
I have been looking for a power supply with a 24 pin MB connector to put in my Rosewill case. I am using a ATI All-in--In-Wonder video card. I want between 400 and 500 watts. I notice some of them have the fan in the top. I don't understand how that works. Do you have to cut a hole in the top of the case? Any recommendations?
Thanks
JIm Allen
Page 1 of 1
Power Supplies
#2
Posted 13 July 2005 - 01:48 AM
Hi Jim,
A good power supply(PS) has two fans and is installed upside down to the picture.
The reason the fan is on the top in the picture it to show you it has two fans.
I run an Antec 550 True power and after I sent a bad one back the new one rocks. I also run an Antec 380 True power with no problems.
Antec has great products/ customer service and getting a bad PS was a fluke.
Also, Thermalright is fast gaining on Antec with a super 500 watt gamers model that comes with all sorts of extras.
Your call. I would research both to see if they meet your needs.
Let us know,
junkdk
A good power supply(PS) has two fans and is installed upside down to the picture.
The reason the fan is on the top in the picture it to show you it has two fans.
I run an Antec 550 True power and after I sent a bad one back the new one rocks. I also run an Antec 380 True power with no problems.
Antec has great products/ customer service and getting a bad PS was a fluke.
Also, Thermalright is fast gaining on Antec with a super 500 watt gamers model that comes with all sorts of extras.
Your call. I would research both to see if they meet your needs.
Let us know,
junkdk
Your Hardware Guide.
#3
Posted 15 July 2005 - 04:05 PM
Hi
Thanks for the info. I ordered the Antec 430 from Newegg.
Thanks Again
Jim
Thanks for the info. I ordered the Antec 430 from Newegg.
Thanks Again
Jim
Share this topic:
Page 1 of 1

Help

Back to top








