Hey guys: I recently installed the above Graphics card to get ready for Blu-Ray. I get an interrupt notice that it wasnt installed properly, I hate those. I have an MSI, micro-star international mainboard, I went into the Bios but could not find" Assign IRQ to VGA". This is the fix supplied by EGVA manual. Can anyone tell me what to do in the Bios to stop the Interrupt ?? Thanks.
Page 1 of 1
Evga E-geforce 8600 Gts IRQ interrupt
#1
Posted 26 August 2008 - 05:40 AM
Windows Vista Ultimate 64 bit/Intel e5300 cpu/ASRock G41M-LE mainboard/G max4500 onboard graphics/4gigs OCZ 800Mhz ram/ VIA onboard HD Vinyl audio/Yamaha RX-V465 HT receiver/ Cambridge SoundWorks and Infinity RS1001 speakers
#2
Posted 26 August 2008 - 10:16 AM
All BIOS's are different. I'll look at mine when I get home and see what I can make of it
Mark
why won't my laptop work?
Having grandkids is God's way of giving you a 2nd chance because you were too busy working your butt off the 1st time around
Do not send me PMs with problems that should be posted in the forums. Keep it in the forums, so everyone benefits
Become a BleepingComputer fan: Facebook and Twitter
why won't my laptop work?
Having grandkids is God's way of giving you a 2nd chance because you were too busy working your butt off the 1st time around
Do not send me PMs with problems that should be posted in the forums. Keep it in the forums, so everyone benefits
Become a BleepingComputer fan: Facebook and Twitter
#3
Posted 27 August 2008 - 11:21 AM
I recall that setting.
http://www.techarp.com/showFreeBOG.aspx?lang=0&bogno=49
It should be on one of the pages after the listing of hard drives and the clock.
Louis
http://www.techarp.com/showFreeBOG.aspx?lang=0&bogno=49
It should be on one of the pages after the listing of hard drives and the clock.
Louis
#4
Posted 30 August 2008 - 04:59 AM
Thanks guys, I'll try again.
Windows Vista Ultimate 64 bit/Intel e5300 cpu/ASRock G41M-LE mainboard/G max4500 onboard graphics/4gigs OCZ 800Mhz ram/ VIA onboard HD Vinyl audio/Yamaha RX-V465 HT receiver/ Cambridge SoundWorks and Infinity RS1001 speakers
Share this topic:
Page 1 of 1

Help


Back to top









