 Power Supply Or Motherboard Faliure?, No hardware working; orange light on motherboard |
Welcome Guest ( Log In | Click here to Register a free account now! )
Register a free account to unlock additional features at BleepingComputer.com
Welcome to Bleeping Computer, a free community where people like yourself come together to discuss and learn how to use their computers. Using the site is easy and fun. As a guest, you can browse and view the various discussions in the forums, but can not create a new topic or reply to an existing one unless you are logged in. Other benefits of registering an account are subscribing to topics and forums, creating a blog, and having no ads shown anywhere on the site.| Important Announcement: We have two terrific contests running on the site that I wanted all our members and guests to know about. The first contest is the HP Magic Giveaway, which is underway as of November 28th. More information can be found at this topic, which will be updated very soon with further information. The second contests, is for the chance to win two Seagate FreeAgent external hard drives. More information about this contest can be found here. These are both amazing contests and I suggest everyone submit an entry for them. - BleepingComputer Management |
  |
 Apr 25 2008, 06:44 AM
Post
#1
|
|
|
Member  Group: Members Posts: 16 Joined: 8-January 07 Member No.: 105,250  |
It smelt of burning whilst I was operating it, so I quickly went to shut down, but before I did, it powered itself off. I opened it up immediately and the inside was extremely hot. After an hour or so, I plugged it back in. None of the fans in the power supply worked. The fan on the motherboard itself gave one turn and stopped, followed by a constant orange light on the motherboard. I don't know about the front-panel lights since they haven't been re-connected since I had the computer repaired a year ago. None of the components look "bulging" or discoloured. There isn't an awful lot of dust present, although I guess it could do with a clean. I've had motherboard failure in the past, but at least then the power supply started. All is under surge protection. The PSU is a 400W and the motherboard I think is an AGP/ 8X. This post has been edited by marbles333: Apr 25 2008, 06:45 AM |
 |
 
|
|
Apr 25 2008, 08:06 AM
Post
#2
|
|
|
Senior Member Group: Members Posts: 431 Joined: 12-February 08 From: Illinois Member No.: 189,860 |
take a screwdriver or something to the 20/4 pin motherboard plug on the PSU and short the green to black and see if the power supply kicks on
|
|
|
|
|
Apr 25 2008, 10:38 AM
Post
#3
|
|
|
arachibutyrophobia Group: BC Advisor Posts: 4,914 Joined: 4-March 05 From: Northern CA. Member No.: 13,532 |
The motherboard shorts out the Power On which your motherboard normally does when you press the momentary power switch on the front of the case. By shorting out the Green wire to any Black wire it bypasses the motherboard allowing you to determine if the problem is the PSU or not.
What smurfgod didn't cover is that for safety reasons you should turn off the PSU by the switch on the rear of it, or unplug it if there isn't a switch. When you disconnect the 20/4 pin connector from the motherboard be careful that when you jump out the Power On that you aren't creating a potential short. For this reason I suggest using a insulated wire for the jumper. If you have a voltage meter you can read the different rail voltages while you have this set up. Put the black probe of the voltage meter in any black wire socket of the 20/4 connector and use the pinout at this site to check the voltages. Once you have installed the jumper and check to be sure that there are no potential shorts you are ready to power up the PSU. -------------------- Lord, may we please have a little more chlorine in the gene pool?
|
|
|
|
|
May 5 2008, 10:00 AM
Post
#4
|
|
|
Member Group: Members Posts: 16 Joined: 8-January 07 Member No.: 105,250 |
Well I've found out that the PSU is knackered by putting it into another machine. I think the heatsink has had it too. Either that or it needs a good clean.
|
|
|
|
|
May 5 2008, 01:36 PM
Post
#5
|
|
|
Forum Addict Group: Members Posts: 6,725 Joined: 3-September 05 From: Killeen, TX Member No.: 33,068 |
|
|
|
|
|
May 5 2008, 03:36 PM
Post
#6
|
|
|
Member Group: Members Posts: 16 Joined: 8-January 07 Member No.: 105,250 |
Am I not right, however, that whether the heat sink is working or not does not affect the processor working?
So even if the heat sink is knackered, shouldn't the processor still operate? Which only leaves me to conclude that the processor has been fried? (I can't get it off at the moment since I don't have a wrist ground nor the tube-stuff [the name has escaped me] that you put between the CPU and the heat sink) (assuming the PSU is operational) The machine now goes "click" "click" "click" when booted up with a working PSU. |
|
|
|
|
May 5 2008, 04:02 PM
Post
#7
|
|
 Hardware Guru Group: BC Advisor Posts: 1,805 Joined: 25-January 07 From: Tiffin, Ohio Member No.: 108,353 |
Without a heatsink the CPU will either shut off to save it self from frying or it will quickly overheat and destroy it self. The word you were searching for is thermal compound. You don't need a grounding strap to work on a computer just make sure to touch the case before you touch any of the components.
-------------------- ~Chad~ Biostar P4M900-M4, Celeron 2.7GHZ OCD 2.95, 2GB patriot DDR2 667 CL3, 60,20 GB IDE HDD, Windows XP Professional SP2, SAS, MBAM, MCAFEE STINGER, Zonealarm, Linksys Router, and Palm TX HandHeld. Sys 2 (FAH Machine) Athlon 650, 768 mb Pc133, Windows XP SP2 |
|
|
|
|
May 5 2008, 04:40 PM
Post
#8
|
|
|
Member Group: Members Posts: 16 Joined: 8-January 07 Member No.: 105,250 |
QUOTE(Sneakycyber @ May 5 2008, 04:02 PM)  Without a heatsink the CPU will either shut off to save it self from frying or it will quickly overheat and destroy it self. The word you were searching for is thermal compound. You don't need a grounding strap to work on a computer just make sure to touch the case before you touch any of the components. Mm I was thinking it could shut itself off, but then again, I didn't think AMD processors did that. Its an Athlon XP I think. I'll have a look tomorrow. The fan on the heat sink DOES spin but actually at quite a medium speed (I can't remember how fast it went in the first place!). I cleaned out the dust too but I doubt it had much influence. |
|
|
|
|
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
| Lo-Fi Version | Time is now: 1st December 2008 - 01:21 PM |
© 2003-2008 All Rights Reserved Bleeping Computer LLC.