 Copy Files From Another Computer? |
Welcome Guest ( Log In | Click here to Register a free account now! )
Register a free account to unlock additional features at BleepingComputer.com
Welcome to Bleeping Computer, a free community where people like yourself come together to discuss and learn how to use their computers. Using the site is easy and fun. As a guest, you can browse and view the various discussions in the forums, but can not create a new topic or reply to an existing one unless you are logged in. Other benefits of registering an account are subscribing to topics and forums, creating a blog, and having no ads shown anywhere on the site.  |
 Apr 2 2008, 11:37 AM
Post
#1
|
|
|
Member  Group: Members Posts: 17 Joined: 25-March 08 Member No.: 198,725  |
-i have one computer now currently running windows 98 -i have one computer im trying to load win 98 with the original cd that is damaged and not allowing me to copy the necessary files it sounds simple but can i somehow copy the files from the computer thats working and load them to the one thats not? and lastly how? |
 |
 
|
|
Apr 2 2008, 12:58 PM
Post
#2
|
|
 Senior Member Group: Members Posts: 377 Joined: 14-November 05 From: Maryland Member No.: 40,546 |
Yes you can.
Ultimately there is more than one way, but the easiest way would be to use software like Easeus Disk Copy. Now... In order to do this you are probably going to want to put the old HD from the original computer into the new one as a slave. If needed I can give you the step-by-step for this as well. -------------------- Website got shutdown = ( ... Ill keep this here anyways =D
 |
|
|
|
|
Apr 2 2008, 01:22 PM
Post
#3
|
|
|
Member Group: Members Posts: 17 Joined: 25-March 08 Member No.: 198,725 |
thank you
it would be greatly appreciated if you could supply the step by step procedure. although im learning quite a bit i dont want to take to much for granted thanks again |
|
|
|
|
Apr 2 2008, 01:28 PM
Post
#4
|
|
 Senior Member Group: BC Advisor Posts: 513 Joined: 15-July 06 From: In the middle of Kansas Member No.: 76,380 |
Your idea will work if you have the cab files on the hard drive of the computer that works.
You can then unhook the cdrom and temporarily connect the hard drive from the system you are working on to that. That way you dont have to change any jumpers on the drives. The 98 cab files consist of 101 files for a size of 121 meg Copy the cabs to a win98 folder on the hard drive then reinstall it to the other system Boot to a 98 startup cisk or cd. Change to the win98 folder on the c drive & run SETUP. |
|
|
|
|
Apr 4 2008, 10:09 AM
Post
#5
|
|
|
Member Group: Members Posts: 17 Joined: 25-March 08 Member No.: 198,725 |
thanks alot guys , alls well.
your support was greatly appreciated,until next time cheers |
|
|
|
|
Apr 4 2008, 04:43 PM
Post
#6
|
|
|
Member Group: Members Posts: 33 Joined: 8-December 06 Member No.: 100,240 |
QUOTE(Eyesee @ Apr 2 2008, 02:28 PM)  Your idea will work if you have the cab files on the hard drive of the computer that works. You can then unhook the cdrom and temporarily connect the hard drive from the system you are working on to that. That way you dont have to change any jumpers on the drives. The 98 cab files consist of 101 files for a size of 121 meg Copy the cabs to a win98 folder on the hard drive then reinstall it to the other system Boot to a 98 startup cisk or cd. Change to the win98 folder on the c drive & run SETUP. Boy, how I wish my file copy/transfer was as simple. I've got a new Acer laptop that doesn't have any external connectors except for USB Ports. And the desktop computer has only parrallel port connectors. How do I transfer files from the desktop to the laptop? |
|
|
|
|
Apr 5 2008, 09:07 AM
Post
#7
|
|
 Computer Masochist Group: Moderator Posts: 5,247 Joined: 27-January 07 From: Cleveland, Ohio Member No.: 108,618 |
Neither computer has a RJ45 network connection? You would simply get a network transfer (null) cable. How old is this computer that only has parallel ports?
If you're referring to an acer aspire 9420 laptop, it has a LAN (network) connection. I'm almost positive you old computer should have the same connection This post has been edited by garmanma: Apr 5 2008, 09:21 AM -------------------- Mark
 why won't my laptop work? Having grandkids is God's way of giving you a 2nd chance because you were too busy working your butt off the 1st time around |
|
|
|
|
Apr 11 2008, 03:04 PM
Post
#8
|
|
|
Member Group: Members Posts: 33 Joined: 8-December 06 Member No.: 100,240 |
QUOTE(garmanma @ Apr 5 2008, 09:07 AM) Neither computer has a RJ45 network connection? You would simply get a network transfer (null) cable. How old is this computer that only has parallel ports? If you're referring to an acer aspire 9420 laptop, it has a LAN (network) connection. I'm almost positive you old computer should have the same connection I'm not as computer literate as I perhaps should be, so would you please explain what is a "RJ45 network connection", and what does it look like? My older desktop computer with the parallel conections was built about 2000. Also can you further define the same for the "...acer aspire 9420 laptop..." "LAN (network) connection..." ? It seems as though the Acer computer had a connection that looks like a wider USB, or modem connection. Would this be the LAN connection? thanks richie |
|
|
|
|
Apr 11 2008, 04:04 PM
Post
#9
|
|
|
Computer Masochist Group: Moderator Posts: 5,247 Joined: 27-January 07 From: Cleveland, Ohio Member No.: 108,618 |
A RJ45 or LAN connection looks like an oversized modular phone plug
 They're inexpensive http://www.newegg.com/Product Just remember, it has to be labeled a CROSS OVER cable or transfer cable This post has been edited by garmanma: Apr 11 2008, 04:05 PM -------------------- Mark
why won't my laptop work? Having grandkids is God's way of giving you a 2nd chance because you were too busy working your butt off the 1st time around |
|
|
|
|
Apr 16 2008, 02:51 PM
Post
#10
|
|
|
Member Group: Members Posts: 33 Joined: 8-December 06 Member No.: 100,240 |
QUOTE(garmanma @ Apr 11 2008, 04:04 PM) A RJ45 or LAN connection looks like an oversized modular phone plug They're inexpensive http://www.newegg.com/Product Just remember, it has to be labeled a CROSS OVER cable or transfer cable Bear with me, I'm getting there. I think I have identified the connector on my Acer Laptop, but I can't find a similar connector on the older ME computer. However, I've got another computer that belonged to my son that has such a connection on a card. I assume that I can just remove that card and install it into my old ME computer, and then connect my Acer Lptop and the ME Computer using the cross over cable. Is that correct? Are there any special programs that I would need to load, or will the ME computer recognize this newly installed card using the "plug-and-play" capability? If everything is operating properly and the computers are connected together, now what steps would I have to take to transfer the files from the ME computer to the Acer? Would I just initiate a simple copy function of selected files from my ME computer with a Save as command to a new ACER Laptop directory? Or is there some other procedure that I've got to follow? Do I have to be concerned that some of the files on the ME computer have settings that were established for the older ME computer? If I copied such files unknowingly to the ACER Laptop, wouldn't the Acer Laptop possibly be affected by the ME Settings? Hope I've been clearly stating my concerns. Any further help and clarification would be greatly appreciated. |
|
|
|
|
Apr 16 2008, 04:07 PM
Post
#11
|
|
|
Computer Masochist Group: Moderator Posts: 5,247 Joined: 27-January 07 From: Cleveland, Ohio Member No.: 108,618 |
Yes, you can remove the card and put it in yours.
QUOTE If everything is operating properly and the computers are connected together, now what steps would I have to take to transfer the files from the ME computer to the Acer? You have to enable file sharing. I am not that knowledgeable with networking. I'm not sure if it's the same procedure as XP. I would recommend posting in our networking forum HERE. It's further down the main forum page. QUOTE Do I have to be concerned that some of the files on the ME computer have settings that were established for the older ME computer? If I copied such files unknowingly to the ACER Laptop, wouldn't the Acer Laptop possibly be affected by the ME Settings? No, you should be fine This post has been edited by garmanma: Apr 16 2008, 04:08 PM -------------------- Mark
why won't my laptop work? Having grandkids is God's way of giving you a 2nd chance because you were too busy working your butt off the 1st time around |
|
|
|
|
Apr 18 2008, 04:04 PM
Post
#12
|
|
|
Member Group: Members Posts: 33 Joined: 8-December 06 Member No.: 100,240 |
QUOTE(garmanma @ Apr 16 2008, 04:07 PM) You have to enable file sharing. I am not that knowledgeable with networking. I'm not sure if it's the same procedure as XP. I would recommend posting in our networking forum HERE. It's further down the main forum page. Thanks for your help. I'm a little more confident about connecting the computers togetherr now. I've been delaying it for some time now, because I was afraid that I might screw up both computers so that they wouldn't work at all. I will be going to the page you reference to see if I can get more information on this. I may be making this out to be a very difficult problem, much more than it really has to be. I certainly hope not. richie78 |
|
|
|
|
Apr 18 2008, 04:30 PM
Post
#13
|
|
|
Computer Masochist Group: Moderator Posts: 5,247 Joined: 27-January 07 From: Cleveland, Ohio Member No.: 108,618 |
You will not damage either computer. The worst that can happen is it just won't work and that will be a configuration problem. Another site that is helpful
http://www.practicallynetworked.com/ Good tutorials on the left side of the page -------------------- Mark
why won't my laptop work? Having grandkids is God's way of giving you a 2nd chance because you were too busy working your butt off the 1st time around |
|
|
|
|
May 6 2008, 03:20 PM
Post
#14
|
|
|
Member Group: Members Posts: 25 Joined: 15-April 08 Member No.: 203,246 |
I have used XCOPY withe excellent success, you need to put the screwed up drive in the good machine as a slave. Fdisk it and format it with the /s, then use the Xcopy command applicable for your version. I am at work so I do not have a copy here but Google has several references to it. It will make an exact copy of the good onto the other.
Here is one source http://www.computerhope.com/xcopyhlp.htm Phil This post has been edited by OldPhil: May 6 2008, 03:24 PM |
|
|
|
|
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
| Lo-Fi Version | Time is now: 6th July 2008 - 12:57 PM |
© 2003-2008 All Rights Reserved Bleeping Computer LLC.