BleepingComputer.com: Nero Express

Hi, I'd really appreciate any help here. I've used Nero 7 Premium, Nero Startsmart for quite a while now, but over the last few months, I've started getting read errors for sectors. The burning is fine, but the reading always has errors. This happens also on Nero Burning Rom. Any ideas why this is happening? I'm using the same kind of discs and burning mediaplayer files. If I leave it to run its course, it takes hours and hours, so I usually abort it.
Below is my log:


1c80001080010000546694707384

Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Nero\Nero 7\Core\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 2/11/2004 12:54:32 PM

NT-SPTI used
Nero Version: 7.0.5.4
Internal Version: 7, 0, 5, 4
(Nero Express)
Recorder: <HL-DT-ST DVD-RW GWA-4082N>Version: CP03 - HA 1 TA 0 - 7.0.5.4
Adapter driver: <IDE> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ?
CD-ROM: <HL-DT-ST DVD-RW GWA-4082N>Version: CP03 - HA 1 TA 0 - 7.0.5.4
Adapter driver: <IDE> HA 1

=== Scsi-Device-Map ===
DiskPeripheral : TOSHIBA MK1031GAS atapi Port 0 ID 0 DMA: On
CdRomPeripheral : HL-DT-ST DVD-RW GWA-4082N atapi Port 0 ID 1 DMA: On

=== CDRom-Device-Map ===
HL-DT-ST DVD-RW GWA-4082N E: CDRom0
=======================

AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
BUFE : 0
Physical memory : 1014MB (1038384kB)
Free physical memory: 371MB (380072kB)
Memory in use : 63 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

3.11.2007
ISO compilation
6:08:02 PM #1 Text 0 File Isodoc.cpp, Line 6414
Iso document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : FALSE
Multisession : TRUE
Multisession type: : Start multisession
Burning mode : DAO
Mode : 1
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet : TRUE
Allow pathdepth more than 8 directories : TRUE
Allow more than 255 characters in path : TRUE
Write ISO9660 ;1 file extensions : TRUE

6:08:02 PM #2 Text 0 File ThreadedTransfer.cpp, Line 531
ReadBuffer-Pipe got 262144KB of Memory

6:08:02 PM #3 Text 0 File Reader.cpp, Line 124
Reader running

6:08:02 PM #4 Text 0 File Writer.cpp, Line 113
Writer E: HL-DT-ST DVD-RW GWA-4082N running

6:08:02 PM #5 ISO9660GEN -11 File Geniso.cpp, Line 3312
First writeable address = 0 (0x00000000)

6:08:02 PM #6 Text 0 File Burncd.cpp, Line 3341
Turn on Disc-At-Once, using DVD media

6:08:02 PM #7 Text 0 File DlgWaitCD.cpp, Line 288
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 599599 (133:14.49, 1171MB)

6:08:02 PM #8 Text 0 File DlgWaitCD.cpp, Line 300
Write in overburning mode: NO (enabled: CD)

6:08:02 PM #9 Text 0 File DlgWaitCD.cpp, Line 2699
Recorder: HL-DT-ST DVD-RW GWA-4082N, Media type: DVD-R
Disc Manufacturer: MCC 02 - RG20
Disc Application Code: 64, Disc Physical Code: 193

6:08:02 PM #10 Text 0 File DlgWaitCD.cpp, Line 472
>>> Protocol of DlgWaitCD activities: <<<
=========================================

6:08:02 PM #11 Text 0 File ThreadedTransferInterface.cpp, Line 847
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 599600 (599600) = #599600/133:14.50
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 599600 blocks [E: HL-DT-ST DVD-RW GWA-4082N]
--------------------------------------------------------------

6:08:02 PM #12 Text 0 File ThreadedTransferInterface.cpp, Line 1059
Prepare recorder [E: HL-DT-ST DVD-RW GWA-4082N] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc not fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 1227980800, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
599600 | lead-out | 1 | 0x41 | 0x00

6:08:02 PM #13 Text 0 File SCSIPassThrough.cpp, Line 39
SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME

6:08:02 PM #14 Text 0 File SCSIPassThrough.cpp, Line 84
SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME

6:08:02 PM #15 Phase 24 File dlgbrnst.cpp, Line 1730
Caching of files started

6:08:02 PM #16 Text 0 File Burncd.cpp, Line 4175
Cache writing successful.

6:08:02 PM #17 Phase 25 File dlgbrnst.cpp, Line 1730
Caching of files completed

6:08:02 PM #18 Phase 36 File dlgbrnst.cpp, Line 1730
Burn process started at 8x (11,080 KB/s)

6:08:02 PM #19 Text 0 File ThreadedTransferInterface.cpp, Line 2685
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

6:08:02 PM #20 Text 0 File DVDR.cpp, Line 2699
Recording mode: Sequential Recording Mode for Multisession

6:08:02 PM #21 Text 0 File DVDR.cpp, Line 2855
Start write address at LBA 0
DVD high compatibility mode: Yes

6:08:02 PM #22 Text 0 File Cdrdrv.cpp, Line 8663
---- DVD Structure: Physical Format Information (00h) ----
Media Type: 0, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 0.0 (0)
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 26127F h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Start sector number of the current Border-Out: 2FE10 h
Start sector number of the next Border-In: 2FFA0 h
Media Specific [16..63]:
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 02 FE 10 00 02 FF A0 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................

6:12:16 PM #23 Text 0 File WriterStatus.cpp, Line 116
<E: HL-DT-ST DVD-RW GWA-4082N> start writing Lead-Out at LBA 599600 (92630h), length 0 blocks

6:12:16 PM #24 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion

6:12:16 PM #25 Text 0 File DVDR.cpp, Line 3095
EndDAO: Last written address was 599599

6:12:18 PM #26 Phase 133 File dlgbrnst.cpp, Line 1730
Writing short lead-out

6:13:00 PM #27 Phase 37 File dlgbrnst.cpp, Line 1730
Burn process completed successfully at 8x (11,080 KB/s)

6:13:00 PM #28 Phase 78 File dlgbrnst.cpp, Line 1730
Data verification started

6:14:49 PM #29 SPTI -1040 File SCSIPassThrough.cpp, Line 290
E: CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1040)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x10
Sense Qual: 0x90
CDB Data: 0x28 00 00 02 C0 30 00 00 10 00 00 00
Sense Area: 0x70 00 03 00 00 00 00 10 00 00 00 0C 10 90
Buffer x04cf6e00: Len x8000

6:15:02 PM #30 SPTI -1040 File SCSIPassThrough.cpp, Line 290
E: CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1040)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x10
Sense Qual: 0x90
CDB Data: 0x28 00 00 02 C0 40 00 00 10 00 00 00
Sense Area: 0x70 00 03 00 00 00 00 10 00 00 00 0C 10 90
Buffer x04cf6e00: Len x8000

6:15:08 PM #31 SPTI -1040 File SCSIPassThrough.cpp, Line 290
E: CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1040)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x10
Sense Qual: 0x90
CDB Data: 0x28 00 00 02 C0 50 00 00 10 00 00 00
Sense Area: 0x70 00 03 00 00 00 00 10 00 00 00 0C 10 90
Buffer x04cf6e00: Len x8000

6:15:20 PM #32 SPTI -1040 File SCSIPassThrough.cpp, Line 290
E: CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1040)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x10
Sense Qual: 0x90
CDB Data: 0x28 00 00 02 C0 70 00 00 10 00 00 00
Sense Area: 0x70 00 03 00 00 00 00 10 00 00 00 0C 10 90
Buffer x04cf6e00: Len x8000

6:15:20 PM #33 SectorVerify 20 File Cdrdrv.cpp, Line 9783
Read errors from sector 180272 to 180319

6:15:35 PM #34 SPTI -1040 File SCSIPassThrough.cpp, Line 290
E: CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1040)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x10
Sense Qual: 0x90
CDB Data: 0x28 00 00 02 C0 90 00 00 10 00 00 00
Sense Area: 0x70 00 03 00 00 00 00 10 00 00 00 0C 10 90
Buffer x04cf6e00: Len x8000

6:15:35 PM #35 SectorVerify 20 File Cdrdrv.cpp, Line 9783
Read errors from sector 180336 to 180351

6:15:47 PM #36 SPTI -1040 File SCSIPassThrough.cpp, Line 290
E: CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1040)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x10
Sense Qual: 0x90
CDB Data: 0x28 00 00 02 C0 A0 00 00 10 00 00 00
Sense Area: 0x70 00 03 00 00 00 00 10 00 00 00 0C 10 90
Buffer x04cf6e00: Len x8000

6:15:54 PM #37 SPTI -1040 File SCSIPassThrough.cpp, Line 290
E: CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1040)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x10
Sense Qual: 0x90
CDB Data: 0x28 00 00 02 C0 B0 00 00 10 00 00 00
Sense Area: 0x70 00 03 00 00 00 00 10 00 00 00 0C 10 90
Buffer x04cf6e00: Len x8000

6:15:57 PM #38 Phase 40 File dlgbrnst.cpp, Line 1417
Aborted by user

6:16:06 PM #39 SPTI -1040 File SCSIPassThrough.cpp, Line 290
E: CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1040)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x10
Sense Qual: 0x90
CDB Data: 0x28 00 00 02 C0 C0 00 00 10 00 00 00
Sense Area: 0x70 00 03 00 00 00 00 10 00 00 00 0C 10 90
Buffer x04cf6e00: Len x8000

6:16:12 PM #40 SPTI -1040 File SCSIPassThrough.cpp, Line 290
E: CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1040)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x10
Sense Qual: 0x90
CDB Data: 0x28 00 00 02 C0 D0 00 00 10 00 00 00
Sense Area: 0x70 00 03 00 00 00 00 10 00 00 00 0C 10 90
Buffer x04cf6e00: Len x8000


Existing drivers:
File 'Drivers\ADPU160M.SYS': Ver=v3.60a (Lab01_N(johnstra).010529-2218), size=101888 bytes, created 4/08/2004 5:00:00 AM
File 'Drivers\PXHELP20.SYS': Ver=2.03.32a, size=20640 bytes, created 18/11/2005 3:19:30 AM (Prassi/Veritas driver for win 2K)
File 'Drivers\InCDfs.SYS': Ver=5, 1, 0, 0, size=102016 bytes, created 30/12/2005 6:03:04 PM (InCD4 driver for win NT/2K/XP)
File 'Drivers\InCDpass.SYS': Ver=5, 1, 0, 0, size=29568 bytes, created 30/12/2005 6:03:22 PM (InCD4 driver for win NT/2K/XP)
File 'Drivers\InCDrec.SYS': Ver=5, 1, 0, 0, size=8704 bytes, created 30/12/2005 6:03:54 PM (InCD4 driver for win NT/2K/XP)

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)