Help - Search - Members - Calendar
Full Version: First Time Building Pc!
BleepingComputer.com > Hardware > System Building and Upgrading
   
Nikas
I would change the PSU to a higher watt like 450 - 500. For the rest, sounds alright to me.

Some other experts could give you better advice.
Wildabeast
I agree with Nikas, get a bigger power supply, and don't go cheap. Antec, Thermaltake, are good. I hear Coolermaster(?) is good too. You have a lot of stuff and don't want your power to lag or fail. I would also recomend getting a case that is tool less. It's up to you, but I prefer the tool less because the drives go in a lot easier. I'm no expert either, but everything else looks compatable... blink.gif
Mr Alpha
300W is big enough. That machine will eat about 250W. And Fortron Source is a good brand. That looks like a nice well-balanced build.
usasma
I ordered a XION case from NewEgg (similiar model) not long ago. Although I ordered green, they sent me blue. I returned it and got another - still got blue instead of green. Then I bought from another online merchant - and still got blue instead of green.

I've got to conclude that there's someone working in the XION plant who is color blind - I finally just kept the blue case and am trying to locate the green lights on eBay! sad.gif
KIDRoach
Is the processor good for its performance? or is it worth it to take an Intel Core 2 Duo 6400 ?

Is the VGA card too high up for the build?

And umm... What's a tool less?

Again, Many thanks
usasma
I ordered a XION case from NewEgg (similiar model) not long ago. Although I ordered green, they sent me blue. I returned it and got another - still got blue instead of green. Then I bought from another online merchant - and still got blue instead of green.

I've got to conclude that there's someone working in the XION plant who is color blind - I finally just kept the blue case and am trying to locate the green lights on eBay! sad.gif
Wildabeast
QUOTE
And umm... What's a tool less?


That's a case that uses clips or rails to install the drives so you don't use screws. Therefore, you don't need a screwdriver. The last 2 puters I built have tool less cases and it's nice just putting the rails on and sliding the drive in. They have cases with sliding clip type things so you slide the drive in, then slide the clip which locks the drive in place. I don't have one of those but I've seen them. Next build, maybe... blink.gif

edit:

Go HERE to Tigerdirect.com and half way down the page is a link called "The truth about power supplies" it has a little chart letting you know about how much power each component uses and you add it up to see how big of a PSU you need.
Mr Alpha
About the Tiger direct power usage. RAM doesn't eat 7 W per 128 MB. More like 7 W per stick.
KIDRoach
I've just noticed that they have this thing called "PCI-e 6 pin connecter" and "PCI-e 8 pin connecter"

What are these? Are these necessary for my graphic cards?
jackfrench89
Some graphics cards require extra power than what can be provided by the pci-e slot because their cores are so hefty. From memory, the 8600 gets all its power from the pci-e slot, so I don't think you need to worry about 6 or 8 pin connectors.
KIDRoach
Thanks, that's all i needed to know i think, but not gonna build it yet. Will build the system in two months time and check again if I should upgrade anything by that time

Thanks for the advices
This is a "lo-fi" version of our main content. To view the full version with more information, formatting and images, please click here.
Invision Power Board © 2001-2009 Invision Power Services, Inc.