Help - Search - Members - Calendar
Full Version: Ghz and Mhz
BleepingComputer.com > Hardware > Internal Hardware
   
bbddown17
i know its a lame question but how many Mhz equals a GHz.
i don't know much but thank you.
conk
1000MHZ = 1GHZ so for example my 2.8GHZ is a 2800MHZ hope that helps
legoman786
actually u are wrong my friend... 1024 mhz = 1 ghz
bbddown17
thank you
Leurgy
I hate to butt in here (well actually I don't smile.gif ) but conk is right.

legoman786 you are confusing MB with MHz.
Mr Alpha
G=Giga, M=Mega, k=kilo are all prefixes used to avoid writing out a lots of zeros. So 1 kg = 1000 g or 1 kHz = 1000 Hz. So then 1 Mg = 1000 kg = 1000000 g or as I use to say, a ton. The same works for Hz ie 1 MHz = 1000 khz = 1000000 Hz. You can use those prefixes befor almost anything, it's just a way to avoid writing out all those zeros. It goes downward also so 1 Hz is 1000 mHz. There are load more prefixes, you can go up way high, or low.

So it is easy, a G is always 1000 M, no matter what they are referring to. Except when the computer people went and complicated things with Bytes. So now 1 GB = 1024 MB just because it looks better in binary! And that is just so wrong on so many levels that I won't go there.
Leurgy
Thanks Mr Alpha, that explains it well.

QUOTE
So then 1 Mg = 1000 kg = 1000000 g or as I use to say, a ton.


Don't you mean a tonne, as opposed to a ton which is 2000 pounds?
Mr Alpha
QUOTE
Don't you mean a tonne, as opposed to a ton which is 2000 pounds?
Yes, and no. The ton I was talking about isn't the english ton. Our old ton used to be about 2000 pounds (things weren't as exact back then) but when we switched to the SI system ton hang around and became 1000 kg. So our old ton is your ton, and our new ton is your tonne. Things get complicated when you trying to accommodate both the english system and the international SI system.
River_Rat
Mr Alpha is correct with his explanation, and a good one too... clapping.gif

Here is a calculator if needed.
http://www.onlineconversion.com/computer.htm
legoman786
shoot... oh well i tried tongue.gif
bbddown17
thank all of you for your effort.
now i know how much is a GHz is for sure.
Leurgy
Thanks for starting this topic bbddown17. I'm sure many people will find it informative and it certainly began a lively discussion. smile.gif


QUOTE
now i know how much is a GHz is for sure.


Too much information? smile.gif
conk
whered all the posts come from i only posted yesterday blink.gif anyway i was close
Leurgy
QUOTE(conk @ Aug 25 2005, 07:26 PM)
1000MHZ = 1GHZ so for example my 2.8GHZ is a 2800MHZ hope that helps

Hey conk you were dead on and put it in a way that people who know CPU's could understand. thumbup.gif
ddeerrff
Alternate definition:

MegaHertz - when something is REALLY painful.
Mr Alpha
QUOTE
MegaHertz - when something is REALLY painful.
Yeah.

Puns are bad - but poetry is verse.
conk
oh well thats good leurgy as im relativly new to hardware dance.gif
This is a "lo-fi" version of our main content. To view the full version with more information, formatting and images, please click here.
Invision Power Board © 2001-2008 Invision Power Services, Inc.