hi all,,, im haveing a bit of a prob with imgburn which is used by DVD FLICK ,,, the files i download convert perfectly, all runs smoothly untill i get to the burn to disc part,,,, i have used this for about 2-3 years now and all the probs come with imgburn,,, i have posted on the imgburn site and got some help,,, i followed all the instructions there and i still get probs,,, the latest one is,,"POWER CALIBRATION AREA ERROR",,, i have slowed the burn down to x8 then to x6 ,,, i have used dvd-r & dvd+r,,,, TDK & Verbaitum and still get this error,,, i have looked for updates to the dvd rom firmware but its not listed on the lite-on site,,, i have a ATPI DVD W DHI6W1P wrighter,,, its a re-branded lite-on,, in a packard bell,,, here's the last burnlog from imgburn.

I 12:15:15 ImgBurn Version 2.4.1.0 started!
I 12:15:15 Microsoft Windows Vista Home Premium Edition (6.0, Build 6001 : Service Pack 1)
I 12:15:15 Total Physical Memory: 2,094,856 KB - Available: 1,227,344 KB
I 12:15:15 Initialising SPTI...
I 12:15:15 Searching for SCSI / ATAPI devices...
I 12:15:16 Found 1 DVD±RW!
I 12:15:16 Operation Started!
I 12:15:16 Source File: C:\Users\Ian No2\Documents\DVD\dvd.iso
I 12:15:16 Source File Sectors: 2,146,816 (MODE1/2048)
I 12:15:16 Source File Size: 4,396,679,168 bytes
I 12:15:16 Source File Volume Identifier: DVD
I 12:15:16 Source File Volume Set Identifier: 38A761950020C1E8
I 12:15:16 Source File Application Identifier: IMGBURN V2.4.1.0 - THE ULTIMATE IMAGE BURNER!
I 12:15:16 Source File Implementation Identifier: ImgBurn
I 12:15:16 Source File File System(s): ISO9660, UDF (1.02)
I 12:15:16 Destination Device: [3:0:0] ATAPI DVD W DH16W1P LP21 (H:) (ATA)
I 12:15:16 Destination Media Type: DVD+R (Disc ID: CMC MAG-M01-00) (Speeds: 6x, 8x, 12x, 16x)
I 12:15:16 Destination Media Sectors: 2,295,104
I 12:15:16 Write Mode: DVD
I 12:15:16 Write Type: Incremental
I 12:15:16 Write Speed: 6x
I 12:15:16 Link Size: Auto
I 12:15:16 Test Mode: No
I 12:15:16 OPC: Yes
I 12:15:16 BURN-Proof: Enabled
W 12:17:25 Optimum Power Calibration Failed! - Reason: Power Calibration Area Error
W 12:17:25 Retrying (1)...
W 12:18:34 Optimum Power Calibration Failed! - Reason: Power Calibration Area Error
I 12:18:34 Filling Buffer... (40 MB)
I 12:18:35 Writing LeadIn...
W 12:19:33 Failed to Write Sectors 0 - 31 - Reason: Power Calibration Area Error
W 12:19:33 Retrying (1 of 20)...
W 12:20:41 Retry Failed - Reason: Write Error
W 12:20:41 Retrying (2 of 20)...
W 12:21:42 Retry Failed - Reason: Power Calibration Area Error
W 12:21:42 Retrying (3 of 20)...
W 12:22:45 Retry Failed - Reason: Power Calibration Area Error
W 12:22:45 Retrying (4 of 20)...
W 12:23:42 Retry Failed - Reason: Power Calibration Area Error
W 12:23:42 Retrying (5 of 20)...
W 12:24:39 Retry Failed - Reason: Power Calibration Area Error
W 12:24:39 Retrying (6 of 20)...
W 12:25:37 Retry Failed - Reason: Power Calibration Area Error
W 12:25:37 Retrying (7 of 20)...
I 12:25:48 Abort Request Acknowledged
W 12:26:35 Retry Failed - Reason: Power Calibration Area Error
E 12:26:35 Failed to Write Sectors 0 - 31 - Reason: Power Calibration Area Error
I 12:26:35 Synchronising Cache...
W 12:28:34 User opted to skip the 'Close Track/Session/Disc' functions.
E 12:28:34 Failed to Write Image!
E 12:28:36 Operation Aborted! - Duration: 00:13:18
I 12:28:36 Average Write Rate: N/A - Maximum Write Rate: N/A
I 12:28:36 Close Request Acknowledged
I 12:28:36 Closing Down...
I 12:28:37 Shutting down SPTI...
I 12:28:37 ImgBurn closed!

any help would be appreciated,,,, thanks all,,,,,,,Ian