Plesae help I think Im infected Options

[jethro66]

Here is my logs..thanx!!

Attached File(s)

 DDS.txt ( 17.52k ) Number of downloads: 9
 Attach.txt ( 3.47k ) Number of downloads: 5

 

[schrauber]

Hello jethro66 and welcome to Bleeping Computer

We apologize for the delay in responding to your request for help. Here at Bleeping Computer we get overwhelmed at times, and we are trying our best to keep up. Please note that your topic was not intentionally overlooked. Our mission is to help everyone in need, but sometimes it takes just a little longer to get to every request for help. No one is ignored here.

If you have since resolved the original problem you were having, we would appreciate you letting us know. If not please perform the following steps below so we can have a look at the current condition of your machine.

If you have not done so, include a clear description of the problems you're having, along with any steps you may have performed so far.

Upon completing the steps below another staff member will review and take the steps necessary with you to get your machine back in working order clean and free of malware.

If you have already posted a DDS log, please do so again, as your situation may have changed.
Use the 'Add Reply' and add the new log to this thread.


Thanks and again sorry for the delay.

We need to see some information about what is happening in your machine. Please perform the following scan:

• Download DDS by sUBs from one of the following links. Save it to your desktop.
  • DDS.scr
  • DDS.pif
• Double click on the DDS icon, allow it to run.
• A small box will open, with an explaination about the tool. No input is needed, the scan is running.
• Notepad will open with the results.
• Follow the instructions that pop up for posting the results.
• Close the program window, and delete the program from your desktop.

Please note: You may have to disable any script protection running if the scan fails to run. After downloading the tool, disconnect from the internet and disable all antivirus protection. Run the scan, enable your A/V and reconnect to the internet.

Information on A/V control HERE

[jethro66]

Heres a new one

Attached File(s)

 DDS.txt ( 17.91k ) Number of downloads: 3
 Attach.txt ( 17.38k ) Number of downloads: 4

 

[Hoov]

Howdy, my name is Hoov, and I will be helping you with your dilemma.

Please make sure you watch this thread for responses. If you click the options tab at the top of your first post, you can select to track this thread.

Here is what I am asking you to do during the repair of your computer

*Tell me everything that you have done, if anything, to try and fix this problem.

*Please only use 1 forum to help clear up your problem. Posting on more than 1 and following instructions from more than 1 forum will cause those helping you to pull out thier hair.

*Follow my instructions - If you can't for some reason, or if you don't understand something, please tell me. If you deviate from my instructions, tell me, it may make a difference on where we go. Don't install anything, even other programs that have nothing to do with security or malware, it could cause things to change, and I would never know it.

*Have faith. I will do all I can to get your computer working, and if I can't - someone else here will know something else to try.

*Stick with me to the end. My aim is to fix your problems, and give you the tools and knowledge to keep this from happening again.

Now onto trying to fix your computer.

If I am helping you and you don't hear from me for 24Hrs, send me a PM Please!

Can you tell me what your problems are and what scans if any you have run to try and fix them? Does Kaspersky find anything?

Please download Malwarebytes Anti-Malware and save it to your desktop.
alternate download link 1
alternate download link 2

• Make sure you are connected to the Internet.
• Double-click on mbam-setup.exe to install the application.
• When the installation begins, follow the prompts and do not make any changes to default settings.
• When installation has finished, make sure you leave both of these checked:
  • Update Malwarebytes' Anti-Malware
  • Launch Malwarebytes' Anti-Malware
• Then click Finish.

MBAM will automatically start and you will be asked to update the program before performing a scan.

• If an update is found, the program will automatically update itself.
• Press the OK button to close that box and continue.
• If you encounter any problems while downloading the updates, manually download them from here and just double-click on mbam-rules.exe to install. Alternatively, you can update through MBAM's interface from a clean computer, copy the definitions (rules.ref) located in C:\Documents and Settings\All Users\Application Data\Malwarebytes\Malwarebytes' Anti-Malware from that system to a usb stick or CD and then copy it to the infected machine.

On the Scanner tab:

• Make sure the "Perform Quick Scan" option is selected.
• Then click on the Scan button.
• If asked to select the drives to scan, leave all the drives selected and click on the Start Scan button.
• The scan will begin and "Scan in progress" will show at the top. It may take some time to complete so please be patient.
• When the scan is finished, a message box will say "The scan completed successfully. Click 'Show Results' to display all objects found".
• Click OK to close the message box and continue with the removal process.

Back at the main Scanner screen:

• Click on the Show Results button to see a list of any malware that was found.
• Make sure that everything is checked, and click Remove Selected.
• When removal is completed, a log report will open in Notepad.
• The log is automatically saved and can be viewed by clicking the Logs tab in MBAM.
• Copy and paste the contents of that report in your next reply and exit MBAM.

Note: If MBAM encounters a file that is difficult to remove, you may be asked to reboot your computer so it can proceed with the disinfection process. Regardless if prompted to restart the computer or not, please do so immediately. Failure to reboot normally (not into safe mode) will prevent MBAM from removing all the malware. MBAM may "make changes to your registry" as part of its disinfection routine. If using other security programs that detect registry changes (ie Spybot's Teatimer), they may interfere or alert you after scanning with MBAM. Please temporarily disable such programs or permit them to allow the changes.

[Hoov]

This thread is closed due to inactivity.
If you need this topic reopened, please send me a PM. This applies to the thread originator only, all others start a new thread.