Printable Version of Topic

Click here to view this topic in its original format

BleepingComputer.com _ Internal Hardware _ Cd Writer Problem.... Please Help

Posted by: nav2684 Nov 2 2007, 10:13 AM

hi friends,

I have a cd writer.... but it has a opening problem. When I push the eject button it doesn't eject normally... then I have to insert a long pin in its small hole next to the push button... even after inserting the pin in the small hole... it takes a lot of time to open.... what should I do........!!!!!!!
Any valuable output will be appreciated........ A BIG THANKS IN ADVANCE ....... GOD BLESS YOU....

Naveen

Posted by: dc3 Nov 2 2007, 10:28 AM

Does the LED on the front of the drive come on when you push the button to open it? Does the LED come on when you close the drive, and are you able to close the drive with the button? Once the drive is closed does read CDs?

The tray will use gears and a belt or just gears to open, if there is a failure of either it will not open normally. If the LED doesn't turn on and the drive doesn't read CDs then it would be a bad drive.

Posted by: nav2684 Nov 3 2007, 09:59 AM

Hi dc3,

All is working fine as described by you. Only Ejecting problem with ROM is there......... Is there any way to solve this problem???

Thanks again.......

Naveen

Posted by: dc3 Nov 3 2007, 10:31 AM

I just want to be sure that I understand this, does the tray close if you push the button?

Can you open the tray by right clicking on the drive in My Computer and then click on Eject?

One last thing to try is to go into the Device Manager and uninstall the drive, reboot the computer and see if the installation Wizard recognizes it a "found new hardware", it should then look for the proper drivers for it.

If all of this fails you may have a mechanical problem, if this is the case it's time for a new drive.